S parameters of Common base configuration

AI Thread Summary
To extract S-parameters for a common base configuration from common emitter S-parameters, one must understand the relationships between the two configurations. Relevant textbooks on BJT basics provide foundational knowledge on this topic. A clarification was made regarding the confusion between S-parameters and H-parameters, emphasizing the need for accurate terminology. Examples and specific conversion methods were requested to aid in understanding. Further resources and detailed explanations can enhance comprehension of this topic.
baby_1
Messages
159
Reaction score
16
Hello
I want to know it we have common Emitter s parameters how can we extract s parameters of common base configuration?if there is no problem give me some examples in converting
Thank you
 
Engineering news on Phys.org
baby_1 said:
Hello
I want to know it we have common Emitter s parameters how can we extract s parameters of common base configuration?if there is no problem give me some examples in converting
Thank you
Can be found in many relevant textbooks covering BJT basics.
 
Hello Dear Lvw
could you introduce me name of some of them?
Thanks
 
Sorry, I have mixed-up s-parameters (your question) and h-parameters.
 
Here's something that might be relevant.
 
  • Like
Likes baby_1

Thread 'Underwater piezoelectric sensor array receive sensitivity'

Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
View full post »

Thread 'Following up on the recent thread about Earth Resistance measurements'

I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
View full post »
Thread 'Beauty of old electrical and measuring things, etc.'

Thread 'Beauty of old electrical and measuring things, etc.'

Even as a kid, I saw beauty in old devices. That made me want to understand how they worked. I had lots of old things that I keep and now reviving. Old things need to work to see the beauty. Here's what I've done so far. Two views of the gadgets shelves and my small work space: Here's a close up look at the meters, gauges and other measuring things: This is what I think of as surface-mount electrical components and wiring. The components are very old and shows how...
View full post »

Similar threads

It is about common emitter configurations
Replies
5
Views
1K
Understanding a heat sensor circuit?
Replies
3
Views
1K
Questions for common emitter, collector and base amplifier.
Replies
2
Views
1K
Gravity Based Electricity Generator
2
Replies
74
Views
7K
Understanding BJT Common Collector Circuit: Voltage and Saturation Explanation
Replies
10
Views
2K
ABC reference frame synchronous generator modelling in Ltspice
Replies
1
Views
3K
Electrostatics - Charged Plate Force Calculator
Replies
4
Views
1K
In bipolar transistor, what's the real reason for base to become narrow?
Replies
8
Views
4K
Common emitter configuration of BJT
Replies
17
Views
7K
Calculating Input/Output Impedance w/ Parallel Resistors
Replies
7
Views
2K

Hot Threads

Recent Insights

Back
Top