Safety of chemical experiments at home

AI Thread Summary
Performing chemistry experiments at home can be done safely, but it requires a solid understanding of lab safety and proper procedures. Basic knowledge from college labs is beneficial, but precautions must be taken, such as treating work areas as contaminated after use and ensuring proper ventilation, as home environments typically lack fume hoods. While purchasing chemicals and labware from platforms like eBay is possible, it is advised to be cautious about the reliability of labels and to consider the high costs associated with ordering chemicals. Using household items for experiments is often recommended as a more accessible alternative. Additionally, it is crucial to have someone nearby to monitor safety during experiments, as working alone can be dangerous. Regarding the silver coating experiment, it is unlikely that the silver applied will adhere effectively to objects like a paintball gun, and alternative methods, such as paint, may be more suitable.
bjon-07
Messages
83
Reaction score
0
I am a freshman at USD ( chem major). I absolutely love chem lab. I have been think about preforming some experiments at home. Is this a bad idea, unsafe.

I have had basic college lab knowldge, i.e. what to do if you spill an acid, ect.

Is it safe to buy chemcials (an or labware) on ebay ( can i assume they are what the labels claims they are)?

One last question, in chem lab we did the classic experiment of sliver coating the inside a beaker. Could i use this to coat other objects in sliver ( i.e. my paintball gun).

Thank you for your time! :)
 
Chemistry news on Phys.org
www.sciencemadness.org/talk/

That's a great forum dedicated to practical chemistry at home. All experiments can be safe, provided you know exactly what you're doing. The stuff on ebay is for real. I suggest CHEMSAVERS INC. as an ebay store for chemicals, and all the glassware you'd need is offered by various members. I wouldn't bother ordering chemicals though, it's a lot more fun to use household items to make what you want.

Oh and I don't think you can use that silver to coat your gun. It's probably just wash off/rub off on your hands. I suggest paint!
 
Well... I'd have to agree with Thunderfvck on this one... mostly.

Here's the thing. It's great that you know basic lab safety procedures, but here are some things to keep in mind.
1. After working with chemicals, the work area should be treated as unclean even after washing it. So if you're planning on doing an experiment on your kitchen counter, I wouldn't want to make dinner on that same counter.
2. Houses are not often equipped with fume hoods, as are most laboratories.
3. I disagree that household items are more fun to work with. But the problem with ordering chemicals is that they're really expensive!
4. Make sure you have someone around who will check up on you periodically. Doing laboratory work alone is NEVER a good idea.
 
I want to test a humidity sensor with one or more saturated salt solutions. The table salt that I have on hand contains one of two anticaking agents, calcium silicate or sodium aluminosilicate. Will the presence of either of these additives (or iodine for that matter) significantly affect the equilibrium humidity? I searched and all the how-to-do-it guides did not address this question. One research paper I found reported that at 1.5% w/w calcium silicate increased the deliquescent point by...

Similar threads

Back
Top