Simple trajectory, maximizing downhill range

  • Thread starter Thread starter trajectory28
  • Start date Start date
  • Tags Tags
    Range Trajectory
AI Thread Summary
To maximize the downhill range of a projectile fired down an inclined plane, the angle of elevation, a, should be set to halfway between the plane's angle, b, and the vertical. The derived relationship shows that a equals pi/4 minus half of angle b. The discussion emphasizes eliminating the time parameter from the trajectory equations to find a direct relationship between y and x. It also suggests writing an equation for the ground surface to determine the intersection point, which is crucial for calculating the downhill range. Understanding how the downhill range correlates with the x-coordinate of this intersection is essential for maximizing the range.
trajectory28
Messages
2
Reaction score
0

Homework Statement


A projectile is fired from the origin down an inclined plane that makes an angle, b, with the horizontal. The angle of elevation of the gun and the initial speed of the projectile are a and V, respectively.

Show that the angle of elevation, a, that will mazimize the downhill range is the angle halfway between the plane and the vertical.




Homework Equations


I've already found the standard parametric equations of the trajectory as a function of time, t, below:

x(t)=(Vcos(a))t and y(t)=(Vsin(a))t - .5gt^2


The Attempt at a Solution


I've already found the downhill range to be:

[(Vcos(a))t]/cos(b)

and if the angle that maximizes the downhill range is indeed the angle halfway between the plane and the vertical, then:

(b+(pi/2))/2 = a + b

a = pi/4 - b/2

I just have no idea where to go after this, I've been trying to figure out a way to represent the time, t, at which the particle strikes the downhill plane as a function of V, a, and b. All has been to no avail so your guidance is much appreciated!
 
Physics news on Phys.org
You can eliminate the time parameter from your first two equations to find y vs x instead of x(t) and y(t). You can also write an equation for y vs x representing the surface of the ground. The downhill range can be calculated from the coordinates of the intersection of these two expressions for y vs x. How does he downhill range relate to the x coordinate of the intersection. Does maximizing one of these maximize the other?
 
Thank you!
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top