Sizing Wind Turbine Generator - 8,000 Nm's - Help Needed!

AI Thread Summary
The discussion centers on sizing a wind turbine generator with a torque specification of 8,000 Nm. The original poster seeks assistance in determining the appropriate generator size and the start and continuous rated torque requirements for 500 kW, 1 MW, and 1.5 MW wind generators. A response indicates that more information is needed to provide accurate calculations, specifically regarding the size of the turbine blades and the generator or motor. Additionally, it is noted that a 1.5 MW generator typically has a rotor diameter of around 6 meters. The conversation highlights the complexities involved in wind turbine generator sizing and the need for precise specifications.
av8ter
Messages
2
Reaction score
0
I am attempting to size a wind turbine generator where the torque available is 8,000 Nm's. Can anyone save me doing the calculations? Regards AV8TUR.
 
Engineering news on Phys.org
Welcome to PF!

It isn't clear to me what you are trying to do. You haven't provided enough information to "size" anything and what you have provided doesn't seem relevant.
 
Are you needing to know which size turbine blade or which size generator/motor?
 
MachX said:
Are you needing to know which size turbine blade or which size generator/motor?
Hi MachX, I am looking for the generator size that 8,000Nm torque can handle. Also if possible, the start and continuous rated torque requirement for a 500Kw, 1Mw & 1.5Mw wind generator.
 
For a 1.5 MW generator rotating at the same speed as the turbine, it's around 6m diameter.
You have nice pictures at Enercon's website.
 
Thread 'Where is my curb stop?'

Thread 'Where is my curb stop?'

My water meter is submerged under water for about 95% of the year. Today I took a photograph of the inside of my water meter box because today is one of the rare days that my water meter is not submerged in water. Here is the photograph that I took of my water meter with the cover on: Here is a photograph I took of my water meter with the cover off: I edited the photograph to draw a red circle around a knob on my water meter. Is that knob that I drew a red circle around my meter...
View full post »

Thread 'Questions about the Tesla turbine'

Hi all, i have some questions about the tesla turbine: is a tesla turbine more efficient than a steam engine or a stirling engine ? about the discs of the tesla turbine warping because of the high speed rotations; does running the engine on a lower speed solve that or will the discs warp anyway after time ? what is the difference in efficiency between the tesla turbine running at high speed and running it at a lower speed ( as fast as possible but low enough to not warp de discs) and: i...
View full post »

Similar threads

Vertical wind turbine with two concentric rotors
Replies
7
Views
3K
Wind Turbine Hydraulic to Electrical Conversion
2
Replies
72
Views
10K
Testing wind/water turbine performance
Replies
3
Views
2K
Factors affecting wind turbine cut in speed
Replies
1
Views
2K
Optimizing Efficiency: Wind Turbine Blade and Hub Design Tips?
Replies
17
Views
4K
Small-scale hydropower generators installed in irrigation canals
Replies
5
Views
4K
Wind Turbine with Generator & Gearbox on the Ground?
Replies
11
Views
8K
How to Calculate RPM of Wind Turbine generator
Replies
13
Views
42K
Wind turbines with many small generators
Replies
40
Views
6K
Performance of Waters' Wind Turbine in open spaces
Replies
18
Views
2K

Hot Threads

Recent Insights

Back
Top