Soccer ball question: hypotenuse/adjacent and opposite lengths

  • Thread starter Thread starter besthands
  • Start date Start date
  • Tags Tags
    Ball
AI Thread Summary
To find the vertical and horizontal components of the soccer ball's velocity vector, use trigonometric functions based on the 45-degree angle. The vertical component can be calculated as 30 m/s multiplied by the sine of 45 degrees, while the horizontal component is found using the cosine of 45 degrees. Both components will equal approximately 21.21 m/s since sine and cosine of 45 degrees are equal. Creating a diagram helps visualize the problem, and applying basic trigonometry will clarify the solution. Understanding these concepts is essential for solving similar physics problems in the future.
besthands
Messages
5
Reaction score
0
Jake kicked a soccer ball into the air at an angle of 45 degrees to the horizontal with an intial result velocity of 30 m/s. Find both the vertical and horizzonatal components of the velocity vector. Hint: the angle of your interest is 45 degrees and you want to find adjacent and opposite lengths with the given hypotenuse 30 m/s.

Thanks for any help provided.
 
Physics news on Phys.org
The question pretty much says everything...
 
But I know nothing :(
 
draw a diagram, label the hypotenuse as your velocity and solve,
 
If you're still having trouble, use trig.
 
Yeah, I figure this is really simple. We've had one class and this is the first homework. I haven't had math in 4 years and even then I struggled. Not seeing how to do this but I'll figure it out somehow. Thanks.

I did make a diagram, have the hypotenuse and 30m/s labeled but that's it.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top