Software to analyse simple continous beam

  • Thread starter Thread starter dadidudada
  • Start date Start date
  • Tags Tags
    Beam Software
dadidudada
Messages
6
Reaction score
0
does anyone have any idea which software i should try to analyse simple continuous beam??..i just want to try the trial one because this is my homework..

can give suggestion??
thanks:smile:
 
Engineering news on Phys.org
Beam of what; electrons? protons? photons?
 
beam of concrete..^^
 

Thread 'Query on Isentropic relationships (such as PV^gamma = constant)'

Hi all, I have a question. So from the derivation of the Isentropic process relationship PV^gamma = constant, there is a step dW = PdV, which can only be said for quasi-equilibrium (or reversible) processes. As such I believe PV^gamma = constant (and the family of equations) should not be applicable to just adiabatic processes? Ie, it should be applicable only for adiabatic + reversible = isentropic processes? However, I've seen couple of online notes/books, and...
View full post »
Thread 'How can I find the cleanout for my building drain?'

Thread 'How can I find the cleanout for my building drain?'

I am a long distance truck driver, but I recently completed a plumbing program with Stratford Career Institute. In the chapter of my textbook Repairing DWV Systems, the author says that if there is a clog in the building drain, one can clear out the clog by using a snake augur or maybe some other type of tool into the cleanout for the building drain. The author said that the cleanout for the building drain is usually near the stack. I live in a duplex townhouse. Just out of curiosity, I...
View full post »

Thread 'Dry sump pump issue'

I have an engine that uses a dry sump oiling system. The oil collection pan has three AN fittings to use for scavenging. Two of the fittings are approximately on the same level, the third is about 1/2 to 3/4 inch higher than the other two. The system ran for years with no problem using a three stage pump (one pressure and two scavenge stages). The two scavenge stages were connected at times to any two of the three AN fittings on the tank. Recently I tried an upgrade to a four stage pump...
View full post »

Similar threads

Elasticity of a Tubular Cantilever Beam
Replies
8
Views
2K
Engineering Deflection and Slope of a Simply Supported Beam
Replies
8
Views
2K
Buckling and modal FEA of a submarine structure
Replies
4
Views
2K
Allowable uniform loads - W beams vs. LVL
Replies
2
Views
4K
Derivation of First Storey Shear Rigidity for a Rigid Frame
Replies
2
Views
1K
I Can Geant4 Simulate Alpha Particles in a Bragg Chamber?
Replies
1
Views
3K
Effective Flexural Rigidity (EI) of Composite Cantilever Beam
Replies
13
Views
9K
Beam centering using a photodiode
Replies
18
Views
4K
Does Adding Multiple Point Loads on a Continuous Beam Reduce the Maximum Moment?
Replies
2
Views
2K
A Interference pattern for a laser beam through an AOM
Replies
4
Views
4K

Hot Threads

Recent Insights

Back
Top