Solve Dynamics Problem: Find Accel. & Net Force

  • Thread starter Thread starter xc630
  • Start date Start date
  • Tags Tags
    Dynamics
AI Thread Summary
To solve the dynamics problem involving a 1500N block on a 40-degree ramp with friction, first resolve the gravitational force into its components: W_h = mg sin(40) for the horizontal component and W_v = mg cos(40) for the vertical component. The applied force of 250N acts against the component of weight down the ramp, and friction must also be considered, calculated using the coefficient of friction. The net force can be determined by subtracting the frictional force and the gravitational component down the ramp from the applied force. Finally, use Newton's second law, F_net = ma, to find the acceleration of the block.
xc630
Messages
13
Reaction score
0
Hi I need soem help on thsi problem

A 1500N block sits at rest on a ramp inclined at 40.0 degrees. The coeffeicients of starting and kinetic friction are 0.100 and there is a force of 250N applied up the ramp. I have to find the acceleration and net force. But how can I find the net force if I can't use sigmaFx= ma?
 
Physics news on Phys.org
Try resolving the forces acting on the block parallel and perpendicular to the plane, then you can use the components of each force.
e.g., weight becomes W_h = mgsin40 and W_v = mgcos40 for the horizontal and vertical components respectively.
 
What would I be solving for?
 
Last edited:

Thread 'Errors and significant figures'

I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
View full post »
Thread 'A cylinder connected to a hanging mass'

Thread 'A cylinder connected to a hanging mass'

Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
View full post »

Similar threads

Finding the work done by a block
Replies
4
Views
3K
Solving for Tension in Net Force Equation: Need Help!
Replies
12
Views
2K
Box and a Spring on on an inclined plane
Replies
11
Views
3K
Calculating Net Force on a Wheel: Magnitude and Direction | 0.350 m Radius
Replies
4
Views
2K
Net Force acting on block on incline
Replies
1
Views
2K
Direction of a rope with a ball inside an accelerating box
Replies
5
Views
1K
Dynamics ramp and friction. Finding angle?
Replies
4
Views
2K
Block on a Spring, Nonconstant Net Force
Replies
6
Views
1K
Tension force and acceleration Problem
Replies
1
Views
2K
Find net external work of a system w/ 2 objects w/ opposite forces
Replies
8
Views
1K

Hot Threads

Recent Insights

Back
Top