Solve Electric Field & Spacing of Parallel Capacitor

  • Thread starter Thread starter Cakiemmatdo
  • Start date Start date
  • Tags Tags
    Capacitor Parallel
AI Thread Summary
An electron is launched at a 45-degree angle from a parallel-plate capacitor, landing 4.0 cm away. The electric field inside the capacitor has been calculated to be 3.5 * 10^3 N/C, but the smallest spacing between the plates remains unclear. To find this spacing, the motion of the electron should be treated as projectile motion, focusing on maximum height. Participants suggest calculating the horizontal velocity and time of flight to determine acceleration, which is critical for using the electric field equation E = m*a/Q. There are concerns about accuracy in the calculations, particularly regarding the time of flight and its impact on the results.
Cakiemmatdo
Messages
8
Reaction score
0
An electron is launched at a 45 angle and a speed of 5.0*10^6 m/sfrom the positive plate of the parallel-plate capacitor shown in the figure (Intro 1 figure) . The electron lands 4.0 cm away.

Homework Statement


Find the electric field inside the parrallel and the smallest possible spacing between the plates


Homework Equations


E = m*a/Q


The Attempt at a Solution


I have found the electric field inside already and it equals 3.5 *10^3 N/C. However I don't know how to find the smallest possible spacing between the plates

Thanks for helping
 
Physics news on Phys.org
How did you get the acceleration?
Treat the motion of the electron as a projectile motion and find the mximum height. That will be spacing between the plates.
 
Okay, so I think I screwed up the first part too
I got wrong answer
Can anyone help??
 
Find the horizontal component of the velocity of the electron. Range is given. From that find the time of flight. Using the vertical component of the velocity and time, find the acceleration.
 
So I did it and I found out that a=-3.125 *10^14, but when I plug it into equation to find E= am/Q I found the result which is as much as half of the correct answer.

Any helps??
 
To calculate acceleration you have to take half the time of flight.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top