Solve Momentum Puzzle: Recoiling Cannon

  • Thread starter Thread starter Awwnutz
  • Start date Start date
  • Tags Tags
    Cannon
AI Thread Summary
The discussion centers on solving the momentum puzzle involving a circus cannon and a projectile. The cannon, with a mass of 5000 kg, recoils at 0.5 m/s after firing a projectile at 40 m/s. The angle of the projectile's motion relative to the ground is calculated to be approximately 50.625 degrees. The initial attempt to find the projectile's mass using conservation of momentum was incorrect due to an error in calculating the x-direction velocity. The correct approach involved adjusting the velocity calculation to account for the cannon's recoil, leading to the accurate determination of the projectile's mass.
Awwnutz
Messages
42
Reaction score
0
http://img266.imageshack.us/img266/3747/cannonlr0.gif

A circus cannon, which has a mass M = 5000 kg, is tilted at θ = 50°. When it shoots a projectile at v0 = 40 m/s with respect to the cannon, the cannon recoils along a horizontal track at vcannon = 0.5 m/s with respect to the ground.

a) At what angle to the horizontal does the projectile move with respect to the ground?

b) What is the mass of the projectile?

c) The cannon is now lowered to shoot horizontally. It fires the same projectile at the same speed relative to the cannon. With what speed does the cannon now recoil with respect to the ground?



Relative Equations:
Conservation of momentum



I already figured out part a. The velocity of the projectile with respect to the ground is the velocity of the projectile with respect to the cannon + the velocity of the cannon with respect to the ground. I found the Velocity of the projectile with respect to the ground to 40.5 m/s. Then i did a ratio to find the angle with respect to the ground.
(40m/s)/(50 degrees)=(40.5m/s)/(theta with respect to the ground)
Theta equals 50.625 degrees.

Its part b that I'm having trouble with. I know that the momentum of the cannon must be equal and opposite to that of the projectile in the x-direction. My equation looked like this:
-(5000kg)(-.05m/s) = Mp(40.5cos(50.625))
From there i found the mass of the projectile to be 65.9444 kg, but this is not right. What am I overlooking. I've went over this 3 times now and I can't seem to find my mistake.
 
Last edited by a moderator:
Physics news on Phys.org
I figured it out by looking at other questions just like this. My resultant in the x direction was wrong. I just did 40cos(50.625) when i needed to do 40cos(50) - 0.5. The rest was pretty easy after that.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Collision of a bullet on a rod-string system: query'
In this question, I have a question. I am NOT trying to solve it, but it is just a conceptual question. Consider the point on the rod, which connects the string and the rod. My question: just before and after the collision, is ANGULAR momentum CONSERVED about this point? Lets call the point which connects the string and rod as P. Why am I asking this? : it is clear from the scenario that the point of concern, which connects the string and the rod, moves in a circular path due to the string...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top