Solve Pendulum Problem: Max Speed of Child in Motion

  • Thread starter Thread starter gangrene
  • Start date Start date
  • Tags Tags
    Pendulum
AI Thread Summary
The discussion revolves around solving a pendulum problem involving a child on a swing, specifically calculating the maximum speed during motion. The correct speed was identified as 1.26 m/s, contrasting with an initial incorrect response of 3.98 m/s. Participants discussed using energy conservation principles, noting the need to determine the change in height from the initial position to the lowest point of the swing. Key calculations involve the height difference derived from the pendulum's length and the cosine of the maximum angle. The conversation emphasizes understanding the relationship between potential and kinetic energy in pendulum motion.
gangrene
Messages
2
Reaction score
0
this question has been bugging me for the last few days and my incompetent professor refuses to help me through email.


-----------------------------

Question 10 (1 point)

A child of mass 15.22 kG sitting on a swing whole length is 2.97
meters is pulled up an angle 42.9 degrees and released. The maximum
speed of the child during the subsequent motion (in Meters/sec) is?

Student response 3.98
Correct answer 1.26E0 (1.26 * 10^0 )


Score 0 / 1

-----------------------------



I tried solving this problem by energy conservation and setting max kinetic energy = max potential energy. I figure when the child swings back to equilibrium angle 0, the speed would be greatest with max kinetic energy and with 0 potential energy. The height I used for max potential energy was 2.97-2.97cos42.9 (L-Lcos42.9).

am I doing something wrong?

thx in advance
 
Physics news on Phys.org
Your method looks OK to me. (The "correct" answer looks wrong.)
 
Hi,

I actually remember coming across this problem a while back,
if I remember correctly, Itired to solve this but got stuck in trying to apply conservation of energy to the system because I was not able to figure out the [change in height] from initial position to the bottom where velocity would have been at its max.

If anyone was able to figure this out, it would be nice if they could explain how.

Thanks,

-Tony Zalles.
 
ok there's two height values to account for. the first value is when the pendulum is in equilibrium making an angle 0 degrees while the other value is when the pendulum is at it's max angle.

for the height when the pendulum is in equilibrium, the height is simply the length of the pendulum L since it's perfectly vertical and there is no x compenent.

for the height when the pendulum is at its max angle, the height is Lcos(max angle). when the pendulum is at its max angle, its vertical height is its y component.

the difference in height between the two is L-Lcos(max angle).
or simplified to L(1-cos(maxangle))

hope that helps
 
Tony Zalles said:
Hi,

I actually remember coming across this problem a while back,
if I remember correctly, Itired to solve this but got stuck in trying to apply conservation of energy to the system because I was not able to figure out the [change in height] from initial position to the bottom where velocity would have been at its max.

If anyone was able to figure this out, it would be nice if they could explain how.

Thanks,

-Tony Zalles.

gangrene said all there is to say but here it is in image.
 

Attachments

  • Untitled-1.jpg
    Untitled-1.jpg
    9.3 KB · Views: 400
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Thread 'A bead-mass oscillatory system problem'
I can't figure out how to find the velocity of the particle at 37 degrees. Basically the bead moves with velocity towards right let's call it v1. The particle moves with some velocity v2. In frame of the bead, the particle is performing circular motion. So v of particle wrt bead would be perpendicular to the string. But how would I find the velocity of particle in ground frame? I tried using vectors to figure it out and the angle is coming out to be extremely long. One equation is by work...
Back
Top