Solve Physics 12 Problem: Helicopter of 5500 kg Reaches 5500 m in 900s

  • Thread starter Thread starter seiferseph
  • Start date Start date
  • Tags Tags
    Physics Physics 12
AI Thread Summary
To calculate the power required for a helicopter of 5500 kg to reach a height of 5500 m in 900 seconds with a velocity of 210 m/s, the formula P = ΔE_t / Δt can be used. The gravitational potential energy (PE) is calculated using mgh, where h is 5500 m, and the kinetic energy (KE) is calculated using 1/2 mv², where v is 210 m/s. It is important to note that the initial gravitational potential energy is considered zero. The calculated power reflects the energy needed to raise the helicopter, but the actual engine power must be higher due to energy losses. This approach effectively combines both potential and kinetic energy to determine the required power output.
seiferseph
Messages
102
Reaction score
0
I have a quick physics 12 problem

A helicopter of 5500 kg starting from rest reaches a height of 5500 m with a velocity of 210 m/s. If this happens in 900 seconds, what is the Power?

i'm not sure how to do this one, i used P = W/t and solved for work being Ef - Ei. but is there no initial energy? so is it just

P = Ek + Ep (both final)/t
to solve? thanks!
 
Last edited:
Physics news on Phys.org
You can assume that initially,the gravitatostatic potential energy is zero and that the gravity field doesn't vary significantly over those 5.5 Km,so you can set the gravitatostatic PE to "mgh".

Daniel.
 
dextercioby said:
You can assume that initially,the gravitatostatic potential energy is zero and that the gravity field doesn't vary significantly over those 5.5 Km,so you can set the gravitatostatic PE to "mgh".

Daniel.

so can you solve like that for the power? Power = potential + kinetic / time ?
 
seiferseph said:
i'm not sure how to do this one, i used P = W/t and solved for work being Ef - Ei. but is there no initial energy? so is it just

P = Ek + Ep (both final)/t
to solve? thanks!
That's correct. (Assuming you measure the PE from ground level.)
P = \Delta E_t /\Delta t
 
Doc Al said:
That's correct. (Assuming you measure the PE from ground level.)
P = \Delta E_t /\Delta t

so potential is m*g*h with height being 5500, and kinetic is 1/2 m*v^2 with v being 210? thanks.
 
Yep.The numbers are not too realistic,but it's okay so far.

Daniel.
 
seiferseph said:
so potential is m*g*h with height being 5500, and kinetic is 1/2 m*v^2 with v being 210? thanks.
That's right. (Realize that you are calculating the power required to raise the helicopter as stated in the given time; the actual power of the engine must be greater than that, since energy is wasted as thermal energy and air movement.)
 
great, thanks!
 
Back
Top