Solve Series Resistor Problems: 7, 11 & 13

  • Thread starter Thread starter mustang
  • Start date Start date
  • Tags Tags
    Resistors Series
AI Thread Summary
To solve the series resistor problems, Ohm's Law (I = V/R) and the total resistance formula for series circuits (Rtotal = R1 + R2 + ...) are applied. In Problem 7, the unknown resistance is calculated as 9.375 ohms using the given values of a 5.0 ohm resistor, a 6.0 V battery, and a current of 0.64 A. Problem 11 involves finding the current in a 6.1 ohm resistor connected to a 6.0 V battery with total resistance of 24.7 ohms, resulting in a current of 0.243 A. For Problem 13, the current in the 3.2 ohm resistor connected in parallel with two other resistors across a 24.0 V battery is determined using parallel resistance formulas. The discussions emphasize the application of Ohm's Law and resistance calculations in circuit analysis.
mustang
Messages
169
Reaction score
0
Problem 7.
A(n) 5.0 ohm resistor is connected in series with another resistor and a 6.0 V battery. The current in the circuit is 0.64A.
Calculate the value of the unkonwn resistance. Answer in ohms.
Note: I don't how to slove this problem.

Problem 11.
A 6.0V battery is connected to four resitors, 8.1ohm, 6.5ohm, 4.0ohm, 6.1ohm. Calculate the current in the 6.1 ohm resistor. Answer in A.

Problem 13.
A(n) 3.2 ohm resistor, a(n) 7.0 ohm resistor, and a(n) 14.1 ohm resistor are connected in parallel across a 24.0 V battery.
What is the current in the 3.2 ohm resistor? Answer in A.
 
Physics news on Phys.org
Start with problem 7. When you wire resistors in series, their resistances add. Thus the total resistance in the circuit is 5 + R ohms, where R is the unknown resistance. Ohm's law indicates the total current in the circuit must be 6.0 V / (5 + R) ohms = 0.64 A.

Solve for R.

- Warren
 


To solve these series resistor problems, we can use Ohm's Law which states that the current (I) in a circuit is equal to the voltage (V) divided by the resistance (R), or I = V/R. We can also use the formula for total resistance in a series circuit, which is Rtotal = R1 + R2 + R3 + ..., where R1, R2, R3, etc. are the individual resistances in the circuit.

Problem 7:
In this problem, we are given the value of one resistor (5.0 ohms), the voltage of the battery (6.0 V), and the current in the circuit (0.64 A). We can use Ohm's Law to solve for the unknown resistance:
R = V/I = 6.0 V/0.64 A = 9.375 ohms.
Therefore, the unknown resistance is 9.375 ohms.

Problem 11:
In this problem, we are given the voltage of the battery (6.0 V) and the values of four resistors (8.1 ohms, 6.5 ohms, 4.0 ohms, and 6.1 ohms). To find the current in the 6.1 ohm resistor, we first need to find the total resistance of the circuit:
Rtotal = 8.1 ohms + 6.5 ohms + 4.0 ohms + 6.1 ohms = 24.7 ohms.
Now, we can use Ohm's Law to solve for the current in the 6.1 ohm resistor:
I = V/R = 6.0 V/24.7 ohms = 0.243 A.
Therefore, the current in the 6.1 ohm resistor is 0.243 A.

Problem 13:
In this problem, we are given the values of three resistors (3.2 ohms, 7.0 ohms, and 14.1 ohms), the voltage of the battery (24.0 V), and the fact that they are connected in parallel. To find the current in the 3.2 ohm resistor, we can use the formula for total resistance in a parallel circuit:
1/Rtotal = 1/R1 + 1/R2 + 1/R3 + ...
1/Rtotal = 1/3.2 oh
 
Thread 'Collision of a bullet on a rod-string system: query'
In this question, I have a question. I am NOT trying to solve it, but it is just a conceptual question. Consider the point on the rod, which connects the string and the rod. My question: just before and after the collision, is ANGULAR momentum CONSERVED about this point? Lets call the point which connects the string and rod as P. Why am I asking this? : it is clear from the scenario that the point of concern, which connects the string and the rod, moves in a circular path due to the string...
Thread 'A cylinder connected to a hanged mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top