Solved: Titration Calc: Find KOH vol to Neutralize H2SO4

AI Thread Summary
The discussion focuses on calculating the volume of 0.1M potassium hydroxide (KOH) needed to neutralize a specific volume of sulfuric acid (H2SO4) solution. Participants emphasize the importance of correctly calculating the moles of H2SO4 in the 25 cm3 sample, noting that the initial calculations were flawed. A balanced chemical equation is highlighted, indicating a 2:1 molar ratio between KOH and H2SO4. The correct approach involves determining the moles of H2SO4 first, then using that to find the necessary moles of KOH for neutralization. Ultimately, accurate calculations are critical for deriving the correct volume of KOH solution required.
ajassat
Messages
55
Reaction score
0

Homework Statement


2.0g of pure undiluted HsSO4 is cautiously added to water and the solution diluted to 500 cm3. What volume of 0.1M potassium hydroxide, KOH, would exactly neutralise 25cm3 of the acid solution?

Homework Equations


concentration = number of moles/volume
mass in grams = number of moles*relative formula mass



The Attempt at a Solution



H2SO4
2.0g/500cm3
Divide by 20 to get values for 25cm3
0.1g/25cm3

Conversion of grams to M
mass in grams = number of moles*relative formula mass
0.1g = number of moles*98
0.1g/98 = number of moles = 1.02moles

We now have

1.02M/25cm3

Let us work out the concentration...

25/100 * 1.02 = 0.0255molar

Now let us work out the volume

Concentration = number of moles/volume
Concentration*volume = number of moles
volume = number of moles/concentration
volume = 1.02/0.0255
volume = 40cm3

Is this correct?
 
Physics news on Phys.org
After you calculate the moles of H2SO4, I think you have problems. 1.02M/25cm3 makes no sense with molarity over volume, but it should be 1.02 moles/25 cm3. You also don't use the molarity of the KOH.
Write a balanced equation first.

You should start this way, which has the moles you calculated.

25 cm^3 solution \left(\frac{1.02 mol H_2SO_4} {500 cm^3 solution}\right)

You have moles of the acid, then multiply it by conversion factors using the balanced equation and the molarity of the base, and you will get the volume of the base.
 
Bohrok said:
After you calculate the moles of H2SO4, I think you have problems. 1.02M/25cm3 makes no sense with molarity over volume, but it should be 1.02 moles/25 cm3. You also don't use the molarity of the KOH.
Write a balanced equation first.

You should start this way, which has the moles you calculated.

25 cm^3 solution \left(\frac{1.02 mol H_2SO_4} {500 cm^3 solution}\right)

You have moles of the acid, then multiply it by conversion factors using the balanced equation and the molarity of the base, and you will get the volume of the base.

Can you show me the complete process?
 
Write the balanced equation first. :smile:
 
bohrok said:
write the balanced equation first. :smile:

2koh + h2so4 --> k2so4 + 2h2o
 
It is a 2:1 ratio.
 
If H2SO4 is 1.02 then KOH is 2.04moles
 
volume = concentration/number of moles
volume = 0.1M/2.04 (KOH) * 1000
volume = 49?
 
So you know you need twice as much KOH as H2SO4 given from
<br /> 25 cm^3 solution \left(\frac{1.02 mol H_2SO_4} {500 cm^3 solution}\right)<br />

which gives you moles of KOH. The molarity of the base is 0.1M KOH or \frac {0.1 mol KOH} {1 L KOH}. How can you use this fraction with your moles of KOH from above to give you the volume of KOH solution?

Edit: Looks like you don't need these steps. Read the next post.
 
  • #10
ajassat said:
If H2SO4 is 1.02 then KOH is 2.04moles

1.02 is the moles of H2SO4 in the 500 cm3 of acid solution, but you need to know how many moles are in 25 cm3 of solution since that is how much is being neutralized by the base. You need to calculate this from what I wrote above. That will give you the actual number of moles of acid you're working with in 25 cm3 that's being neutralized. Then the 2:1 ratio you said is correct and you should get the correct answer.
 
  • #11
0.051 moles in 25cm^3. Therefore 0.102 moles for KOH.

Revised volume calculation

V = 0.1/0.102
 
  • #12
Yes, that looks right.
 
  • #13
I need to multiply the answer by 1000 right?
 
  • #14
That would give you mL of solution, but the question didn't say in what units to give the volume. You should be okay with leaving it in L unless you're expected to use a certain unit when the question doesn't specify.
 
  • #16
ajassat said:
Conversion of grams to M
mass in grams = number of moles*relative formula mass
0.1g = number of moles*98
0.1g/98 = number of moles = 1.02moles

You do have a mistake here. 0.1/98 is .00102, so that is the actual number of moles of H2SO4. This is also wrong

ajassat said:
volume = concentration/number of moles

Concentration = moles/volume, so volume = moles/concentration

I hadn't checked your work thoroughly before, but I think these are all the mistakes you had.
 
Back
Top