Solving a Projectile Motion Problem: Find the Initial Speed

AI Thread Summary
To solve the projectile motion problem, the key is to focus on the vertical motion since the horizontal range is not provided. The projectile is fired from a 150m high cliff and takes 10 seconds to reach the base, indicating a downward trajectory. The equation of motion for vertical displacement can be applied, leading to the calculation of initial velocity as approximately -34 m/s, where the negative sign indicates an upward direction. The discussion emphasizes the importance of correctly defining the coordinate system and the signs of vector quantities in calculations. Ultimately, understanding the direction of gravity and initial velocity is crucial for accurate results in projectile motion problems.
catalyst55
Messages
24
Reaction score
0
Can someone just tell me where to start with this Q? I know it will have to solve some simult. eqs. to work it out.

"A projectile is fired from the top of a cliff 150m high, and takes 10s to reach the base of the cliff after being fired."

Find the initial speed.

Thanks.
 
Last edited:
Physics news on Phys.org
The only velocity component thsat is of interest is the vertical one.
I think you have to assume the projectile is fired vertically, because else you cannot determine the initial speed since the horizontal component does not affect the falling time.
Set up the equation of motion for the vertical component.
 
Find the kinematics equation relating distance, initial velocity, time, and acceleration. Be careful with the signs of the quantities.
 
Indeed the problem does not give the "range" (on the Ox=horizontal axis) of the projectile,so the answer should be given as:

speed(t=0)=|\vec{v}(0)|=\sqrt{v_{0,y}^{2}+(\frac{R}{10})^{2}} \ [ms^{-1}]

,where R is the horizontal range (in meters) and v_{0,y} needs to be computed by the OP.

Daniel.
 
Last edited:
dextercioby said:
Indeed the problem does not give the "range" (on the Ox=horizontal axis) of the projectile,so the answer should be given as:

speed(t=0)=|\vec{v}(0)|=\sqrt{v_{0,y}^{2}+(\frac{R}{10})^{2}} \ [ms^{-1}]

,where R is the horizontal range (in meters) and v_{0,y} needs to be computed by the OP.

Daniel.
What are you saying . Since the range is not given, then we assume the motion is vertical. Moreover is given that the problem is 1D.

Let's take the positive y-direction the one pointing downwards. So, g = +9.8m/s, s = +150 m, t = 10s.
<br /> s = v_{0}t + \frac{gt^2}{2}<br />

<br /> v_{0} = \frac{2s - gt^2}{2t} = -34 m/s<br />


The negative direction indicates that the initial velocity is upward.
 
Last edited:
Relax,where did you see such nonsense "A projectile is fired from the top of a cliff 150m high, and takes 10s to reach the base of the cliff after being fired." I find ridiculous that the movement is 1D,the projectile would come back into your head and,provided it does not explode,it would crush it...

:-p

Don't read more into it,than it's actually written...

Daniel.
 
Don't you ever use approximations, Daniel? :-p
 
Sure,but it's not the case here.The text of the problem,even incomplete,is very clear and leaves no room for approximations/personal interpretations.

Daniel.
 
Thanks ramollari. It's that simple!

The prob was that i was using distance, not displacement (wasnt considering them all as vectors).

Btw, it is vertical motion -- i explicitly stated that it was 1d so there's no horizontal movement (even if there was, it wouldn't affect the initial speed). It's like the person leaned over and fired the bullet.

Cheers
 
Last edited:
  • #10
That's a pretty slow bullet.
 
  • #11
wow i don't know what yall are doing, but i used this equation

DeltaX = .5(A)(T)^2 + Vi(T)

plug in the numbers...

150 = .5(9.8)(10)^2 + Vi(10)

dont read further if you don't want the answers...

simplify...

150 = 490 + Vi(10)

do some basic algebra...

step1
-340 = Vi(10)
step2
-34=Vi

and its in the negative direction since its going down

am i just crazy or something, but i think that equation works, i have no idea what you guys were doing, square rooting your stuff like that...unless you were using the:

Vf^2 = Vi^2 + 2(A)(DeltaX) equation
 
  • #12
Incorrect,it's negative,since it's going UP,you've chosen the "g" with a positive sign,which automatically assumes the positive axis of coordinate to be pointing DOWN...:wink:

Daniel.
 
  • #13
i was under the impression he was firing it downward...which would make it a negative direction if my starting point is the cliff top and distance above him is positive
 
  • #14
Then if you've chosen the "g" to be positive,your answer should be +34m/s.

Daniel.
 
  • #15
i agree, it s 34m/s...
 
  • #16
either way the number is right, its just positive or negative by your opinion of where the startpoint is
 
  • #17
TsunamiJoe said:
either way the number is right, its just positive or negative by your opinion of where the startpoint is

Opposite directions make a great difference! We have to know the direction of vector quantities, otherwise we go wrong in our calculations.
 
  • #18
gravity is just about always negative, it was just a typo that i left out the negative sign in the initial equation, so please just get over it and stop busting on me for it
 
  • #19
Gravity is a vector...Period.The sign (+/-) of the scalar depends on how u choose the axis perpendicular to the ground.Namely on how you chose its positive sense...

Gravity (i.e.gravitational intensity) is therefore a vector.It's neither negative,nor positive.

Daniel.
 
  • #20
Perhaps the cliff moved out of the way, Dexter :-)
 
Back
Top