How to Calculate the Speed of a Moving Object Using Radar and Beat Frequency?

AI Thread Summary
The discussion focuses on calculating the speed of a van moving away from a radar emitter using the Doppler effect and beat frequency. The radar emits microwaves at a frequency of 3.20 GHz, and the beat frequency observed is 838 Hz. The initial attempt to find the van's speed using the beat frequency led to an incorrect result, prompting a reevaluation of the Doppler equations. Participants clarify that the van first acts as an observer and then as a source of reflected waves, requiring two applications of the Doppler effect. The final approach involves setting up equations that account for both scenarios to solve for the van's speed accurately.
k77i
Messages
28
Reaction score
0

Homework Statement




A radar device emits microwaves with a frequency of 3.20e+09 Hz. When the waves are reflected from a van moving directly away from the emitter, the beat frequency between the source wave and the reflected wave is 838 beats per second. What is the speed of the van? (Note: microwaves, like all forms of electromagnetic radiation, propagate at the speed of light c = 3.00e+08 m/s.)


Homework Equations



frequency of beat = |f1-f2|

f' = [(v-vo)/v]fo
where v is the speed of emitted frequency (the speed of light on this case), vo is the speed of the observer and fo is the frequency of the observer
The above equation is for when the observer is moving away from the source and the source is stationary

The Attempt at a Solution



First i found the frequency of the observer (van) by using the first equation:

f(beat) = |f1-f2|
838 = |3.20e+09 - f2|
So f2 = 3 199 999 162

Then i used the second equation to find v0 (speed of the van):

f' = [(v-vo)/v]fo
3 199 999 162 = [(3.00e+08 - vo)3.00e+08]3.20e+09
this gave me vo = 78.56m/s, but according to the homework it's not right

Is it because I am not supposed to consider f2 as f'? If not I am not exactly sure how to solve for vo.
 
Physics news on Phys.org
There are actually two doppler shifts here. Since these are radio waves I'm not sure if you can use the classical doppler equations (due to relativity).

The van is first a moving observer. The incident frequency is reflected at some frequency f'. You only know the incident frequency.

Now the van becomes a moving source of reflected microwaves (can you see why?) Apply the appropriate doppler equation using the f' from earlier as your incident frequency and 3 199 999 162 as your observed frequency.
 
AtticusFinch said:
The van is first a moving observer. The incident frequency is reflected at some frequency f'. You only know the incident frequency.

Now the van becomes a moving source of reflected microwaves (can you see why?) Apply the appropriate doppler equation using the f' from earlier as your incident frequency and 3 199 999 162 as your observed frequency.

ok so i get why the van is first the observer then becomes the source.
so if i do it like that, I should set up the first equation as:

f' = [(v-vo)/v]fo = [(1 - vo/3.00*10^8)]3.2*10^9

Is this right? because then i still didn't find the f' from the first equation which you're telling me to use as the incident frequency (fo) in the second equation when the van is the source
 
k77i said:
ok so i get why the van is first the observer then becomes the source.
so if i do it like that, I should set up the first equation as:

f' = [(v-vo)/v]fo = [(1 - vo/3.00*10^8)]3.2*10^9

Is this right? because then i still didn't find the f' from the first equation which you're telling me to use as the incident frequency (fo) in the second equation when the van is the source

If you're teacher wants you to ignore relativity you are correct so far.

Now, like you are saying, write another equation for the van as a moving source. The initial frequency is f' and the observed frequency is given as 3 199 999 162. If i remember correctly it should look like this:

3199999162=(v/(v+vs))f'

but you have already expressed f' in terms of vo which is equal to vs.

So through substitution you'll get a equation with only one unknown.
 
AtticusFinch said:
If you're teacher wants you to ignore relativity you are correct so far.

Now, like you are saying, write another equation for the van as a moving source. The initial frequency is f' and the observed frequency is given as 3 199 999 162. If i remember correctly it should look like this:

3199999162=(v/(v+vs))f'

but you have already expressed f' in terms of vo which is equal to vs.

So through substitution you'll get a equation with only one unknown.

Alright then basically the final equation should look something like this?
3199999162 = ((9.6*10^17)/(3*10^8+x))-(9.6*10^17x)/(9.6*10^16+3*10^8x), where x is the value of the speed of the van.

Because this gives me 'no solution'
 
k77i said:
Alright then basically the final equation should look something like this?
3199999162 = ((9.6*10^17)/(3*10^8+x))-(9.6*10^17x)/(9.6*10^16+3*10^8x), where x is the value of the speed of the van.

Because this gives me 'no solution'

Ok that's fine. Remember beats can mean the incident frequency is either lower than the emitted by 838 Hz or higher than the emitted by 838 Hz. You know the lower one didn't work so try the higher one.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'A bead-mass oscillatory system problem'
I can't figure out how to find the velocity of the particle at 37 degrees. Basically the bead moves with velocity towards right let's call it v1. The particle moves with some velocity v2. In frame of the bead, the particle is performing circular motion. So v of particle wrt bead would be perpendicular to the string. But how would I find the velocity of particle in ground frame? I tried using vectors to figure it out and the angle is coming out to be extremely long. One equation is by work...
Back
Top