Starting my EE degree next fall, help me plan my summer

AI Thread Summary
The discussion centers on preparing for an Electrical Engineering degree after completing a general sciences program at Cegep in Quebec. The participant seeks recommendations for books and hands-on kits to bridge the gap in practical knowledge compared to peers from a technical electrical engineering background. Key book recommendations include "The Art of Electronics," "The ARRL Handbook for Radio Amateurs," and "The Science of Radio" by Nahin, which provide foundational knowledge in a reader-friendly manner. Additionally, engaging with hobbyist kits like Nerdkits and gaining summer job experience in electronics are suggested for practical exposure. Overall, the focus is on balancing theoretical reading with hands-on practice before starting university.
tamtam402
Messages
199
Reaction score
0
I come from Quebec, which means I had to go to Cegep (it's a post-secondary school required to attend Universities). There's 2 main "branches" to go to electrical engineering at uni here:

1) Complete a "general sciences" 2 years course at Cegep, which is what I did. It's the normal path to attend university in something sciences related. I'll have completed Calculus I, II, III, Linear Algebra, a basic statistics course, as well as physics I, II and III.

2) Complete a "technical electrical engineering" 3 years course at Cegep. Most people doing this end up on the job market (as opposed to the first choice - it's only a general education program that is pretty much the continuity of high school), but people are allowed to attend university also.

Is there a must-read book that could give me a jump start?? I'd say my math is above average, considering I worked hard and ended up with 90-100 grades in every course listed above. I also took the optional Calculus III course covering ODE's, double and triple integrals, etc.

What I'd like to do is start reading on Electrical Engineering related stuff, since the guys coming from the technical cegep course will have much more experience than me and it's kinda scary to think I'll have 0 practical knowledge. On the other hand, I only have 1 summer to "prepare" myself so I don't want to read very specific stuff, which will probably be covered again at university anyway. I also started teaching myself C++ programmation, and I plan to keep doing that this summer.

With what I said above, could you guys please recommend me 1-2 books that would be good for me??
Also, is there any hobbyist kit geared toward newbies like me?? Something that would get me some very basic yet structured hands-on experience would be good.

Thanks in advance!
 
Engineering news on Phys.org
No answers? :(
 
I would recommend having a good time in the sun... Anyhow if your masochism needs to be satisfied, the two books that seem to get recommended over and over are:

"The Art of Electronics" by Horowitz and Hill
It has a very nice writing style that is fun to read, but there is a lot of knowledge pressed between the two covers so it goes too fast for some people.

The other book is
"The ARRL Handbook for Radio Amateurs (ARRL Handbook for Radio Communications)"
which I have never read.
 
I would echo the other poster -have a nice summer, and be prepared to work hard when school starts in the Fall.

If you want a "fun" book that teaches some core EE stuff while being entertaining (and including some great history, and some problems to solve if you wish), I highly recommend "the science of radio" by Nahin. Truly excellent. Will teach you basic stuff about radio, basic circuits, and Fourier analysis - perhaps the most important mathematical tool you will learn during your engineering training. Is written for folks with your kind of background - if anything you have more background than you need.

Kits ... Some people have fun with nerdkits - google them and browse their site to see if it looks interesting. They are also sold through amazon now, I think. I have never worked with them, so who knows ...
 
I would suggest your finding a summer job working in an electronics-oriented company that would give you hands-on experience. I worked summers and part time at Hewlett Packard from 1954 to 1958 while attending college. Very good experience using lots of test equipment. Better than just reading books.

Bob S
 
Thanks for the suggestions everyone! I ordered a nerdkit, after reading some reviews.
 
While I was rolling out a shielded cable, a though came to my mind - what happens to the current flow in the cable if there came a short between the wire and the shield in both ends of the cable? For simplicity, lets assume a 1-wire copper wire wrapped in an aluminum shield. The wire and the shield has the same cross section area. There are insulating material between them, and in both ends there is a short between them. My first thought, the total resistance of the cable would be reduced...
Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
Back
Top