Tension in Two Strings With Different Angles

AI Thread Summary
To analyze the tension in two strings at different angles supporting a 200g mass, it's crucial to understand that the system is in equilibrium. Knowing the tension in one string and its angle allows for the calculation of the unknown tension in the other string. The equilibrium condition requires resolving the tensions into vertical and horizontal components, which can be achieved using trigonometric functions. The discussion emphasizes the importance of using two equations to solve for the two unknowns, specifically the magnitudes of the tensions. Ultimately, the problem was resolved with the assistance of other participants.
Cjjw
Messages
6
Reaction score
0
Hi, I have been stuck on this question for a while, and I need help figuring it out.
For a lab, we had two ring stands set up about 1m apart from each other, with the rings at different heights, and we tied a string between them. We then placed a 200g mass on the string. We had a LabPro with a force sensor attatched to one of the strings to read the tension, but we don't have the tension for the other string. We're supposed to resolve each tension into vertical and horizontal components, but I'm not sure how to do that when we don't have the tension in the one string.
Can anyone help me out with that?
 
Physics news on Phys.org
You know that the mass is in equilibrium. Knowing one tension and its direction, and the direction of the other tension, you should be able to determine the magnitude of the unknown tension which keeps the 200g mass in equilibrium.
 
By the direction, do you mean the angle? And if so, how would I use the directions to determine the magnitude?
 
And would I be doing the two equations and two unknowns thing?
 
Ok, I figured it out. Thanks for your help!
 
Thread 'Is 'Velocity of Transport' a Recognized Term in English Mechanics Literature?'

Thread 'Is 'Velocity of Transport' a Recognized Term in English Mechanics Literature?'

Here are two fragments from Banach's monograph in Mechanics I have never seen the term <<velocity of transport>> in English texts. Actually I have never seen this term being named somehow in English. This term has a name in Russian books. I looked through the original Banach's text in Polish and there is a Polish name for this term. It is a little bit surprising that the Polish name differs from the Russian one and also differs from this English translation. My question is: Is there...
View full post »

Thread 'Newton's first law?'

Some physics textbook writer told me that Newton's first law applies only on bodies that feel no interactions at all. He said that if a body is on rest or moves in constant velocity, there is no external force acting on it. But I have heard another form of the law that says the net force acting on a body must be zero. This means there is interactions involved after all. So which one is correct?
View full post »

Similar threads

I Understanding the physics of a bosun's chair and mechanical advantage
Replies
6
Views
4K
B What is tension and how does it affect a rope?
Replies
2
Views
2K
Is my understanding of tension force accurate?
Replies
9
Views
4K
Tension in a string connecting two blocks having equal and opposite velocities
Replies
21
Views
457
Force pulling on a string at an angle with a block at the other end
Replies
2
Views
1K
How do nodes on a string produce tension if they are stationary?
Replies
4
Views
3K
Tension at two points on a string? (Tension in general)
Replies
7
Views
16K
What is the direction of tension force in a rope?
Replies
4
Views
23K
Tension in a pulley system pulled at an angle
Replies
3
Views
3K
Effect of temperature on vibrational frequency of a violin string
Replies
5
Views
2K

Hot Threads

Recent Insights

Back
Top