Terminal Velocity and Bouyancy - F = kv

AI Thread Summary
The discussion revolves around a physics problem involving a rock sinking in the ocean, influenced by gravity, buoyancy, and drag. The rock's terminal speed is calculated to be 3.02 m/s, derived from the balance of forces at terminal velocity. For the second part, the user struggles with integrating the net force equation to find depth, speed, and acceleration after 1.5 seconds, expressing difficulty with integration techniques. The acceleration equation is noted as a(t) = -4.90 N + 1.63s^-1 * v(t), indicating a relationship between acceleration and velocity. The user anticipates that solving part (b) will facilitate answering part (c) regarding the depth at 99.0% of terminal speed.
ultimateman
Messages
7
Reaction score
0

Homework Statement



A rock of mass 0.400 kg is released from the surface and sinks in the ocean. As the rock descends it is acted upon by three forces: gravity, buoyancy, and drag. The buoyancy is an upward force equal to half its weight. Drag from the water can be modeled by F = kv, where k = 0.650 kg/s.

(a) Determine the terminal speed of the sinking rock.

(b) Determine its depth, speed, and acceleration 1.50 seconds after it is released.

(c) At what depth will it be at 99.0% of its terminal speed?


Homework Equations



Net force (vertical), F = ma, F = kv

The Attempt at a Solution



The solution to a) was easy enough.

Fnet = mg + FB + Fdrag

Fnet = -3.92 N + 1.96 N + Fdrag = 0 N (at terminal speed)

Fdrag = 1.96 N = 0.650 kg/s *vt

vt = 3.02m/s.

b) For calculating the depth, speed, and acceleration, I think I need to integrate the function of the net force with respect to time to get the equations for velocity and position. But I have not had much luck doing so because I am rusty on my integration.

The equation for the acceleration is

a(t) = -4.90 N + 1.63s-1 *v(t)

so I'm thinking

dv/dt = -4.90 N + 1.63s-1 *dx/dt

but then I get something like

dv = -4.90 N dt + 1.63s-1 *dx

and I don't know what to do with dx?

c) I'm thinking the answer for this part will be easy enough once I have the answer to b...
 
Last edited:
Physics news on Phys.org
bump:smile:
 
ultimateman said:
The equation for the acceleration is

a(t) = -4.90 N + 1.63s-1 *v(t)

so I'm thinking

dv/dt = -4.90 N + 1.63s-1 *dx/dt
Instead of dx/dt, try leaving that as v in this equation.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Back
Top