The Spectrum for a pure electron plasma

AI Thread Summary
Recent research from the Navy has revealed cusp confinement, a potential breakthrough for fusion power, involving a plasma primarily composed of electrons, hydrogen ions, carbon, and a noble gas. The experiment utilized a vacuum chamber where electron and plasma guns were activated to create a high beta mode, demonstrating long-sought-after plasma confinement. The team is analyzing inferometry data and radiation emissions, particularly focusing on the H-Alpha line at 656 nanometers, to understand the plasma's composition and behavior. It was noted that a pure electron plasma lacks a spectrum, as light emission requires the presence of other ion species for phenomena like line emission and bremsstrahlung. This research could significantly advance plasma physics and fusion energy development.
PolywellGuy
Messages
7
Reaction score
0
Hello All,

In this recent Navy publication, a team of researchers said they have discovered cusp confinement. This could be a major step towards fusion power. I am working on a write up of this publication. I am trying to understand their inferometry data. As far as I can tell, the plasma was made of (in order by strength):

1. Electrons (likely the greatest component)
2. Hydrogen ions/neutrals
3. Carbon
4. A noble gas of some kind
5. Air/junk (negligible amount)

These things were probably (+), (-) and neutrals.

Does anyone have the spectrum for a pure electron plasma?
 
Physics news on Phys.org
Plasmas usally are macroscopically electrically neutral, consisting of electrons and ions from the original atoms.
 
This experiment specifically went for (-) plasma; AKA the "quasineutral" assumption does not apply. The Navy/LANL team injected 3 amps of electrons for 150 microseconds at 7,200 volts. This is what the device looked like compared to earlier (2005) experiments:

cyDAfGe.png


This was inside a cube vacuum chamber, 45 cm a side. The electron guns were the blue objects. The plasma guns are in red. For a shot, the Navy had control of three variables: (1) plasma gun (2) electron gun and (3) the containing magnetic field. Here is a timeline of one shot:

2SCouXH.png


This experiment had five stages to it:

1. Control - The chamber is under vacuum (no pressure is given) and magnetic fields are on.

2. Injection - This is when the electron and plasma guns are switched on.

3. Formation

4. High Beta Mode - This is the fabled "cusped plasma confinement"; long predicted, never observed.

5. Dissipation

The navy is proving all of this by interpreting the radiation off of the cloud. For example their hard X-ray data shows high plasma confinement.

RGKwxu2.png


Much of their data comes from shielded detectors, reading a light signal. In visible, X-ray, ect.. I need a better understanding of expected output from a plasma cloud like this. For example, if the cloud was just deuterium the light coming off of it would look like this:

GBvWhvO.png


In this case, the navy blocked all but the H-Alpha line. That is the spike at 656 nanometers.

Unfortunately, I can only guess at what the plasma was made of (see my list above). The odd component was carbon. Normally, the system would be deuterium, deuterium+, electrons and a trace of junk. They injected carbon. Finally, I know there are formulas to predict these spectra and that maybe a good place to start.
 
I won't try to answer your question, since it is not an area of expertise for me. However my guess is that how the plasma is generated would be a major determining factor.
 
A pure electron plasma doesn't have a spectrum. You need some other ion species in there. There are two major types of light emission from a plasma: line emission and bremsstrahlung. Line emission comes from electrons bound to nuclei, so there is none from free electrons. Bremsstrahlung comes from the interaction between two different species in a plasma, such as electrons and hydrogen ions. You don't get bremsstrahlung from a pure electron plasma.
 
This is from Griffiths' Electrodynamics, 3rd edition, page 352. I am trying to calculate the divergence of the Maxwell stress tensor. The tensor is given as ##T_{ij} =\epsilon_0 (E_iE_j-\frac 1 2 \delta_{ij} E^2)+\frac 1 {\mu_0}(B_iB_j-\frac 1 2 \delta_{ij} B^2)##. To make things easier, I just want to focus on the part with the electrical field, i.e. I want to find the divergence of ##E_{ij}=E_iE_j-\frac 1 2 \delta_{ij}E^2##. In matrix form, this tensor should look like this...
Thread 'Applying the Gauss (1835) formula for force between 2 parallel DC currents'
Please can anyone either:- (1) point me to a derivation of the perpendicular force (Fy) between two very long parallel wires carrying steady currents utilising the formula of Gauss for the force F along the line r between 2 charges? Or alternatively (2) point out where I have gone wrong in my method? I am having problems with calculating the direction and magnitude of the force as expected from modern (Biot-Savart-Maxwell-Lorentz) formula. Here is my method and results so far:- This...
Back
Top