Thermo Help for Exam: Textbook Examples & Problems

  • Thread starter Thread starter PhysicsGod
  • Start date Start date
  • Tags Tags
    Exam Thermo
AI Thread Summary
The discussion focuses on preparing for a Thermodynamics exam, specifically using the 7th edition of Moran and Shapiro's textbook, with an emphasis on Chapter 3, which covers properties of ideal gases. Participants are seeking additional practice problems and hints for understanding concepts like pressure, temperature, and specific volume. There is also a query about the appropriate use of compression tables versus steam tables, noting that while both provide similar values, steam tables are considered more accurate. The conversation highlights the need for clarity on when to apply each table effectively. Overall, the thread serves as a resource for exam preparation and clarification of thermodynamic concepts.
PhysicsGod
Messages
2
Reaction score
0
Hey, i have a Thermo exam tomorrow, and I've been working through the textbook examples and problems, and i was wondering if anyone here had some helpful problems for me to work out or any general hints or anything.

Our textbook is the 7th edition of moran shaprio thermo and the exam is mainly over chapter 3, which is basically finding all of the properties such as pressure, temp, specific volume, work, and such of ideal gases, like r-22, ammonia and others through the use of steam tables.

Any help would be appreciated.
Thanks.

Also i apologize if this is in the wrong section, i wasn't sure where to put it.
 
Science news on Phys.org
Also, i guess a question i have is when to use the compression tables vs the steam tables? They both give the same values, but the steam tables are more accurate, and it seems that the steam tables can be used whenever the compression can, so why would i want to use the compression table approach?
 

Thread 'Condensate rate of water for an air conditioning cooling coil'

I need to calculate the amount of water condensed from a DX cooling coil per hour given the size of the expansion coil (the total condensing surface area), the incoming air temperature, the amount of air flow from the fan, the BTU capacity of the compressor and the incoming air humidity. There are lots of condenser calculators around but they all need the air flow and incoming and outgoing humidity and then give a total volume of condensed water but I need more than that. The size of the...
View full post »
Thread 'Why work is PdV and not (P+dP)dV in an isothermal process?'

Thread 'Why work is PdV and not (P+dP)dV in an isothermal process?'

Let's say we have a cylinder of volume V1 with a frictionless movable piston and some gas trapped inside with pressure P1 and temperature T1. On top of the piston lay some small pebbles that add weight and essentially create the pressure P1. Also the system is inside a reservoir of water that keeps its temperature constant at T1. The system is in equilibrium at V1, P1, T1. Now let's say i put another very small pebble on top of the piston (0,00001kg) and after some seconds the system...
View full post »

Similar threads

A Thermodynamics Derivative Reduction Problems
Replies
2
Views
2K
Thermo: Calculating the temperature drop from gas leaving a system
Replies
11
Views
9K
Testing C & Python Resources for Problems in Astrophysics for upcoming CS Exam
Replies
6
Views
2K
Classical Chapters from Morin's book that help with F=ma exam prep?
Replies
7
Views
4K
Quantum Identifying an old quantum mechanics textbook
Replies
47
Views
5K
Reviewing for the FE exam, came across questionable thermo problem.
Replies
1
Views
2K
Studying Should I drop my dreams? (Daydreamer with underachieving abilities)
Replies
5
Views
2K
Quantum mechanics textbook?
Replies
7
Views
3K
Planning on studying math for the college entrance exam, help needed
Replies
4
Views
3K
Density of moist air at high temperatures?
Replies
11
Views
5K

Hot Threads

Recent Insights

Back
Top