Thermodynamics Energy when flashing water -- How much water will be vaporized?

AI Thread Summary
The discussion focuses on calculating the amount of water vaporized when flashing water at 75 degrees Celsius, with post-flash conditions of 67 degrees Celsius and a constant pressure of 0.27 bar. The flow rate is specified as 15,000 kg per hour. Participants are encouraged to show their work and follow a structured template for clarity. The thread has been locked to prevent further responses. Accurate calculations are essential for the project at hand.
Keeskwaak
Messages
11
Reaction score
2
TL;DR Summary
Thermodynamics Energy, flashing water how much water will be vaporized
Hello all,
For a project I really need to know some number i can't seem to produce myself.

we are flashing water @75 degrees Celsius, the water after flash-cooling is 67 degrees constant pressure is 0.27 bar (absolute) flow rate is 15000 KG/per hour.

how much water is vaporized?

Help is much appreciated
 
Engineering news on Phys.org
Please repost this in the homework help section, and follow the template/show your work (even if not actual homework it is a homework type problem). Thanks, thread locked.
 
Thread 'Turbocharging carbureted petrol 2 stroke engines'
Hi everyone, online I ve seen some images about 2 stroke carbureted turbo (motorcycle derivation engine). Now.. In the past in this forum some members spoke about turbocharging 2 stroke but not in sufficient detail. The intake and the exhaust are open at the same time and there are no valves like a 4 stroke. But if you search online you can find carbureted 2stroke turbo sled or the Am6 turbo. The question is: Is really possible turbocharge a 2 stroke carburated(NOT EFI)petrol engine and...
I need some assistance with calculating hp requirements for moving a load. - The 4000lb load is resting on ball bearing rails so friction is effectively zero and will be covered by my added power contingencies. Load: 4000lbs Distance to travel: 10 meters. Time to Travel: 7.5 seconds Need to accelerate the load from a stop to a nominal speed then decelerate coming to a stop. My power delivery method will be a gearmotor driving a gear rack. - I suspect the pinion gear to be about 3-4in in...
Back
Top