Tug-of-War Problem: Is Rope Horizontal? | Physics Explained

  • Thread starter Thread starter hydra03
  • Start date Start date
AI Thread Summary
In a tug-of-war, the rope cannot be perfectly horizontal due to the force of gravity acting on it, which causes it to sag. The mass of the rope means that it experiences downward gravitational force, affecting its shape when pulled by two teams. A free body diagram illustrates that if the rope were horizontal, the forces would not balance, as the gravitational force would not be countered. Conversely, when the rope sags, the tension from both teams pulling in opposite directions creates equilibrium, allowing for a stable configuration. Thus, the rope's mass and the gravitational force ensure it cannot remain perfectly horizontal during the game.
hydra03
Messages
2
Reaction score
0

Homework Statement


During a tug-of-war game, two teams pull in opposite directions on a heavy rope. Is it possible for the rope to be perfectly horizontal? Explain using principles of physics.


Homework Equations



None.

The Attempt at a Solution


I overheard the teacher explaining it to a peer and heard something like "there is a force of gravity acting on the rope itself, etc." I thought about it, but I can't really explain why this is the case.
 
Physics news on Phys.org
If the rope is heavy, it must have mass. Does that help? Try making a free body diagram of a point at the center of the rope. What forces are acting on the point at the center of the rope, keeping in mind that the rope has mass?
 
To elaborate on where cbasst is headed, assume that both sides are pulling with equal force (and they are all the same height). You would agree that the rope is not accelerating because the sum of all forces = 0.

Case 1: Draw a free body diagram of the rope if it is perfectly horizontal (straight line).
Case 2: Draw a free body diagram of the rope if it "sags" like a normal rope would sag.

In both cases (for the sake of simplicity), assume the mass is concentrated at the midpoint of the rope. This would make Case 2's rope look more like "v" than a "u".

See if this exercise sparks any insight.
 
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top