Understanding Friction on a Car

  • Thread starter Thread starter Shark 774
  • Start date Start date
  • Tags Tags
    Car Friction
AI Thread Summary
Friction forces on a car include rolling friction and static friction, each playing distinct roles in vehicle dynamics. Rolling resistance, a type of friction, acts similarly to traditional friction but its direction varies with the tire's rolling motion, affecting acceleration and braking differently. The combined effect of rolling resistance and friction results in a net friction coefficient that can change depending on whether the vehicle is accelerating or braking. While rolling resistance is typically minimal, it can significantly impact performance in off-road conditions. Understanding these friction forces is crucial for optimizing vehicle handling and efficiency.
Shark 774
Messages
42
Reaction score
0
Hi,

I'm struggling to understand the different friction forces acting on a car. What is rolling friction and what is its effect? What is static friction and how can it provide forward motion, but also oppose forward motion when the car breaks??

Thanks.
 
Physics news on Phys.org
In addition, from http://hpwizard.com/car-performance.html" :

The http://en.wikipedia.org/wiki/Rolling_resistance" (Fr = fr Fv) is a force that acts in a way similar to the friction force (Ff = µ Fv). The only difference is that the rolling resistance direction depends on the rolling direction of the tire and the friction force direction depends on the torque application. So sometimes the rolling resistance acts against the friction force (acceleration) and sometimes it works with the friction force (braking).

Since the rolling resistance and the friction force are always in the same plane, you could say that the result is a tire with «net» friction coefficient (= μ ± fr) that is greater or smaller depending if the vehicle is accelerating or braking.

The rolling resistance is very small and can be omitted in most cases. The net effect is usually a variation of 1-2% of the original tire friction coefficient. It is more important in off-road situations where that variation can go up to 30% (tire on sand for example).

rolling-resistance.gif
 

Attachments

  • rolling-resistance.gif
    rolling-resistance.gif
    14.9 KB · Views: 2,244
Last edited by a moderator:
Hi there, im studying nanoscience at the university in Basel. Today I looked at the topic of intertial and non-inertial reference frames and the existence of fictitious forces. I understand that you call forces real in physics if they appear in interplay. Meaning that a force is real when there is the "actio" partner to the "reactio" partner. If this condition is not satisfied the force is not real. I also understand that if you specifically look at non-inertial reference frames you can...
I have recently been really interested in the derivation of Hamiltons Principle. On my research I found that with the term ##m \cdot \frac{d}{dt} (\frac{dr}{dt} \cdot \delta r) = 0## (1) one may derivate ##\delta \int (T - V) dt = 0## (2). The derivation itself I understood quiet good, but what I don't understand is where the equation (1) came from, because in my research it was just given and not derived from anywhere. Does anybody know where (1) comes from or why from it the...
Back
Top