Understanding Precession, Nutation, and Spin in Rotating Objects

  • Thread starter Thread starter Bobster
  • Start date Start date
  • Tags Tags
    Precession Spin
AI Thread Summary
The discussion focuses on understanding the dynamics of a spinning cylinder undergoing precession and nutation. The user seeks clarification on the relationship between angular velocities, proposing that the total angular velocity can be expressed as ω = √(ω²P + ω²N). They also inquire about the effects of precession and nutation on a sensor's readings, speculating that the centripetal acceleration experienced would involve a time-dependent radius. The conversation emphasizes the complexities of motion in rotating systems and the need for precise calculations to account for changing parameters. Overall, the user is exploring the intricacies of rotational dynamics and sensor behavior in such scenarios.
Bobster
Messages
16
Reaction score
0
Hi guys !

Im trying to get my head round precession, nutation and spin.

Suppose I have a cylinder of height L, base radius R. Initially it is just spinning about its central axis (i.e. line joining cone tip to the centre of base). In this scenario,

centripetal acceleration experienced by say an accelerometer placed on the radius of the base would be = Rω2.

However when it starts spinning and nutating with angular velocities say ωP and ωN,

am I right in thinking ω = √ω2P+ω2N ?

And also, what would my sensor 'experience' now that it is nutating and precessing ? I am guessing it would be a Rω2 sin term but this time 'R' would be a time dependent function and not constant. What do you think ?
 
Physics news on Phys.org
Any ideas ?
 
Thread ''splain this hydrostatic paradox in tiny words'

Thread ''splain this hydrostatic paradox in tiny words'

This is (ostensibly) not a trick shot or video*. The scale was balanced before any blue water was added. 550mL of blue water was added to the left side. only 60mL of water needed to be added to the right side to re-balance the scale. Apparently, the scale will balance when the height of the two columns is equal. The left side of the scale only feels the weight of the column above the lower "tail" of the funnel (i.e. 60mL). So where does the weight of the remaining (550-60=) 490mL go...
View full post »

Thread 'The Effect of Linear and Rotational Motion on Measured Weight'

Consider an extremely long and perfectly calibrated scale. A car with a mass of 1000 kg is placed on it, and the scale registers this weight accurately. Now, suppose the car begins to move, reaching very high speeds. Neglecting air resistance and rolling friction, if the car attains, for example, a velocity of 500 km/h, will the scale still indicate a weight corresponding to 1000 kg, or will the measured value decrease as a result of the motion? In a second scenario, imagine a person with a...
View full post »

Thread 'Coulomb gauge implies instantaneous radial electric field?'

Scalar and vector potentials in Coulomb gauge Assume Coulomb gauge so that $$\nabla \cdot \mathbf{A}=0.\tag{1}$$ The scalar potential ##\phi## is described by Poisson's equation $$\nabla^2 \phi = -\frac{\rho}{\varepsilon_0}\tag{2}$$ which has the instantaneous general solution given by $$\phi(\mathbf{r},t)=\frac{1}{4\pi\varepsilon_0}\int \frac{\rho(\mathbf{r}',t)}{|\mathbf{r}-\mathbf{r}'|}d^3r'.\tag{3}$$ In Coulomb gauge the vector potential ##\mathbf{A}## is given by...
View full post »

Similar threads

I Order of rotations: precession, nutation, spin
Replies
3
Views
2K
B Clashing approximations for this precession problem
Replies
5
Views
2K
Gyroscope Experiment Homework: Find Centre of Gravity & Nutation Effects
Replies
1
Views
2K
I Rotating plate thrown parallel to ground
Replies
2
Views
1K
Precession of Rotating Rigid Body from Two Different Frames
Replies
2
Views
2K
Calculating forces regarding angular momentum/gyroscopic forces?
Replies
2
Views
3K
Maximum angle reached by a cube placed inside a spinning cylinder
Replies
22
Views
2K
Calculating Torque for Gyroscopes to Precess in Hubble Telescope
Replies
6
Views
2K
Frictional Torque of a Spinning Top
Replies
6
Views
3K
Gyroscopes and the torque required for precession
Replies
3
Views
12K

Hot Threads

Recent Insights

Back
Top