What is the electric field on the axis of a uniformly polarized cylinder?

  • Thread starter Thread starter jdstokes
  • Start date Start date
  • Tags Tags
    Cylinder
jdstokes
Messages
520
Reaction score
1
Hi all,

I'd like to get your opinion on the validity of my working for the following problem. According to my lecturer the answer is incorrect, but I can't figure out where I'm going wrong.

A cylinder of radius a is uniformly polarized in a direction perpendicular to the axis. The magnitude of the dipole moment per unit volume is P. Determine the electric field on the axis of the cylinder.

To me this seems like a straightforward application of Gauss' law, namely

<br /> \int_{\mathrm{rectangle}}\vec{E} {\cdot} d \vec{A} + \int_{\textrm{half-cylinder}}\vec{E} {\cdot} d \vec{A} = \frac{2aP\ell}{\varepsilon_0}<br />

<br /> E (2a \ell) + \int_{-\pi/2}^{+\pi/2}E\cos\theta a \ell d\theta = \frac{2aP\ell}{\varepsilon_0} \Rightarrow<br />

<br /> E = \frac{P}{2\varepsilon_0}<br />

answer should by P / (4 epsilon).

Thanks

James
 
Physics news on Phys.org
Your use of Gauss is wrong.
Dimensionally, the answer must be proportional to P/epsilonnaught,
so any mistake will look close to right.
You have to integrate Coulomb's law for the bound surface charge.
 
Hi, I had an exam and I completely messed up a problem. Especially one part which was necessary for the rest of the problem. Basically, I have a wormhole metric: $$(ds)^2 = -(dt)^2 + (dr)^2 + (r^2 + b^2)( (d\theta)^2 + sin^2 \theta (d\phi)^2 )$$ Where ##b=1## with an orbit only in the equatorial plane. We also know from the question that the orbit must satisfy this relationship: $$\varepsilon = \frac{1}{2} (\frac{dr}{d\tau})^2 + V_{eff}(r)$$ Ultimately, I was tasked to find the initial...
The value of H equals ## 10^{3}## in natural units, According to : https://en.wikipedia.org/wiki/Natural_units, ## t \sim 10^{-21} sec = 10^{21} Hz ##, and since ## \text{GeV} \sim 10^{24} \text{Hz } ##, ## GeV \sim 10^{24} \times 10^{-21} = 10^3 ## in natural units. So is this conversion correct? Also in the above formula, can I convert H to that natural units , since it’s a constant, while keeping k in Hz ?
Back
Top