Vibrating beam - physical interpretation

AI Thread Summary
The discussion focuses on the physical interpretation of a vibrating beam, particularly the displacement of a bar fixed at both ends. The analysis compares the energy ratios of the first three harmonics based on different initial displacements, concluding that the configuration with no even harmonics produces the purest tone, beneficial for instruments like a xylophone. Additionally, it is noted that a tuning fork provides a more distinct pitch compared to a vibrating string, making it preferable for tuning musical instruments. The conversation emphasizes the relationship between harmonic energy and sound purity. Overall, the findings suggest that configurations with lower energy in higher harmonics yield clearer tones.
Unco
Messages
156
Reaction score
0

Homework Statement


This question arises from partial differential equations work, but concerns introductory-level physics.

The interpretation is of solutions representing the displacement (a function, u(x, t), of position and time) of a vibrating bar, fixed but hinged at each end.

My question #1:
I have found the ratio of the "energy" (the square coefficient of the eigenfunction, and independent of time), for the first three harmonics for three different initial displacements. The bar has length L and these initial displacements are (a) x(L-x), (b) x^2(L-x), (c) x^3(L-x), so correspond to hitting the bar in the center, and progressively off center.

Some definitions - pitch of a note: the frequency of the fundamental harmonic; tone: frequency of higher harmonics; purest tones are those of lower energy in higher harmonics.

For (a), even harmonics give zero displacement and hence zero energy. Odd harmonics for (a) are the same as those of (b). Energy of harmonics, even or odd, of (c) are higher than both (a) and (b).

My question is, which is considered to produce the purest tone, for playing a xylophone, for instance: having no even harmonics (which means no n=2 harmonic but also fewer higher - say, n=10 - harmonics) as in (a), or having similarly low energy harmonics in (b) which doesn't miss out on n=2, etc. I take it they're both better than (c).

---
My question #2:
Also relating to a vibrating beam, I have found (following instruction) the ratio of the frequency (coefficient of t in a cosine term) of the second harmonic to the fundamental to be greater for a tuning fork than that of a vibrating string. Is it better, therefore, to use a tuning fork to tune a musical instrumental rather than a vibrating string because the pitch of a note is more marked/distinguishable to the ear for the tuning fork?

Apologies for any incorrect physical terminology. "Energy" is described to us in inverted commas, but I hope the description has some recognisable physical element to it, anyway.
 
Physics news on Phys.org
Homework Equations N/AThe Attempt at a SolutionMy attempt at a solution #1:A higher energy in higher harmonics would produce a less pure sound, so I think (a) would produce the purest tone for playing a xylophone.My attempt at a solution #2:Yes, it is better to use a tuning fork to tune a musical instrument rather than a vibrating string because the pitch of a note is more marked/distinguishable to the ear for the tuning fork.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top