What am I doing wrong in my calculations

  • Thread starter Thread starter aruji73
  • Start date Start date
  • Tags Tags
    Calculations
AI Thread Summary
The discussion focuses on calculating the extension of the upper spring in a system with three hanging masses in a downward-moving elevator that is accelerating upward. The initial calculation provided was 20.987 cm based on the formula involving mass and spring constant. Participants question whether the answer considers the combined tension from all three masses and whether significant digits are correctly applied. It is suggested to analyze the system starting from the bottom mass to determine the tension in the upper spring accurately. The conversation emphasizes the importance of understanding the interactions between the springs and masses in the calculation.
aruji73
Messages
19
Reaction score
0
What is the distance the upper spring is extended from its unstretched length?
Now, three masses m1 = 3.3 kg, m2 = 9.9 kg and m3 = 6.6 kg hang from three identical springs in a motionless elevator. The springs all have the same spring constant of 229.57N/m

Now the elevator is moving downward with a velocity of v = -2.3 m/s but accelerating upward with an acceleration of a = 4.8 m/s2. (Note: an upward acceleration when the elevator is moving down means the elevator is slowing down.)

What is the distance the upper spring is extended from its unstretched length?
cm


I did

(3.3(9.8+4.8))/229.57=0.20987 m =20.987 cm
 
Physics news on Phys.org
aruji73 said:
What is the distance the upper spring is extended from its unstretched length?
Now, three masses m1 = 3.3 kg, m2 = 9.9 kg and m3 = 6.6 kg hang from three identical springs in a motionless elevator. The springs all have the same spring constant of 229.57N/m

Now the elevator is moving downward with a velocity of v = -2.3 m/s but accelerating upward with an acceleration of a = 4.8 m/s2. (Note: an upward acceleration when the elevator is moving down means the elevator is slowing down.)

What is the distance the upper spring is extended from its unstretched length?
cm

I did

(3.3(9.8+4.8))/229.57=0.20987 m =20.987 cm
That looks good to me.

Is there a problem regarding significant digits?
 
Hi I am not sure my answer is supposed to be in cm but I am sure I have done it right puzzling indeed
 
In your problem you have mensioned three springs and three masses. Whether the springs are connected with each other? If yes, who?
 
springs are connected is m1 at top is connected to m2 in middle which is connected to m3 in the bottom
 
So, the spring at the top is supporting, directly or indirectly, all three masses? Won't that increase the tension in it?
 
this is the pic
 

Attachments

  • masseshangingfromsprings2smaller.png
    masseshangingfromsprings2smaller.png
    12.1 KB · Views: 891
Right, so what is the tension in the top spring? If you're not sure, start with the free body diagram of the bottom mass and work up.
 
Back
Top