What Are Step Relays and How Do They Function?

  • Thread starter Thread starter ahmedahmed
  • Start date Start date
  • Tags Tags
    Facts
AI Thread Summary
Step relays, also known as stepper relays or stepper switches, operate by passing current through a coil of wire that attracts a piece of iron, moving a lever to engage a gear wheel one tooth at a time. This mechanism allows for sequential switching of electrical contacts, making them useful in applications like lighting control and old telephone exchanges. They can also be utilized in appliances, such as washing machines, to control various functions in a specific order. The complexity of these devices lies in their mechanical design, but their fundamental operation is straightforward. For more detailed information and visuals, users are encouraged to search online.
ahmedahmed
Messages
9
Reaction score
0
step relay?

Hi everybody

I heard that there is a step relay device and I didn't see it.

Can anyone help me about it?
I need information and pictures

Thanks

Best regards
Ahmed Hassan
 
Engineering news on Phys.org


Look up "stepper relay" on Google. plenty of replies there.

These relays are mechanically complicated but the principle is easy.
A current is passed through a coil of wire. This attracts a piece of iron which moves a little lever with a hook on it.
The hook pulls on the teeth of a gear wheel one tooth at a time each time the coil gets current.

This causes the relay to rotate the wheel in steps. This might then cause the wheel to turn electrical contacts on and off.

You could use this to switch to turn lights on in sequence or you could use it to switch telephone lines. Old telephone exchanges used to use these for doing this.

You could use it in a washing machine to turn on the water then the motor and so on.
 


They're also called "stepper switch".

http://www.sscnet.ucla.edu/geog/gessler/topics/step-switch-1-24-b.jpg
 
Last edited by a moderator:


Thanks for all
 
Very basic question. Consider a 3-terminal device with terminals say A,B,C. Kirchhoff Current Law (KCL) and Kirchhoff Voltage Law (KVL) establish two relationships between the 3 currents entering the terminals and the 3 terminal's voltage pairs respectively. So we have 2 equations in 6 unknowns. To proceed further we need two more (independent) equations in order to solve the circuit the 3-terminal device is connected to (basically one treats such a device as an unbalanced two-port...
suppose you have two capacitors with a 0.1 Farad value and 12 VDC rating. label these as A and B. label the terminals of each as 1 and 2. you also have a voltmeter with a 40 volt linear range for DC. you also have a 9 volt DC power supply fed by mains. you charge each capacitor to 9 volts with terminal 1 being - (negative) and terminal 2 being + (positive). you connect the voltmeter to terminal A2 and to terminal B1. does it read any voltage? can - of one capacitor discharge + of the...
Thread 'Weird near-field phenomenon I get in my EM simulation'
I recently made a basic simulation of wire antennas and I am not sure if the near field in my simulation is modeled correctly. One of the things that worry me is the fact that sometimes I see in my simulation "movements" in the near field that seems to be faster than the speed of wave propagation I defined (the speed of light in the simulation). Specifically I see "nodes" of low amplitude in the E field that are quickly "emitted" from the antenna and then slow down as they approach the far...
Back
Top