Construction What are the benefits and challenges of using slat walls in interior design?

  • Thread starter Thread starter BillTre
  • Start date Start date
AI Thread Summary
The discussion centers around slat walls, which are customizable wall systems made of vertical wooden slats mounted in grooves. Participants note that while slat walls can create interesting designs, they may pose cleaning challenges, especially in non-waterproof environments. Clarification was made that the topic is about slat walls, not slate, the rock material. A link to additional information about slat walls was shared, highlighting that many designs are simple, consisting of uniform boards, while others feature grooves for displaying materials. Overall, the conversation emphasizes the aesthetic appeal of slat walls alongside practical concerns regarding maintenance.
BillTre
Science Advisor
Gold Member
2024 Award
Messages
2,686
Reaction score
11,719
Here is something I saw today, slat walls.
Looks pretty cool, very customizable.
Vertical pieces of wood (?) mounted (in some cases) in a sheet on the wall with grooves to fit the vertical boards into it. Some interesting designs are possible:
Screenshot 2023-10-09 at 8.48.28 AM.png


Screenshot 2023-10-09 at 9.08.22 AM.png


These would be difficult to keep clean (unless in a waterproof room you could hose down).
 
Last edited:
Physics news on Phys.org
BillTre said:
slate walls.
Slat or Slate walls? And can you post a link to more info? Thanks. :smile:
 
berkeman said:
Slat or Slate walls? And can you post a link to more info? Thanks. :smile:
Fixed that.
Slat, like in slats, not slate the rock.
Here is a website I found.

Turns out there are a lot of these. Most are just a boring series of little boards mounted on a wall.
Some, which I had seen before, are grooves cut into a wall board for mounting store display materials.
 
Here's a video for making computer files and machine cutting of the slats.

 
BillTre said:
These would be difficult to keep clean
My first thought.
 
  • Like
Likes Greg Bernhardt
BillTre said:
These would be difficult to keep clean
Averagesupernova said:
My first thought.

Nu-uh... :smile:

 
Philips Hue was the very first provider of smart LED bulbs that can be controlled wirelessly. Over the years, as Philips sold ever improved models of smartbulbs, it became very difficult to identify exactly which model one of their bulbs is. Once I've installed a smart bulb, there is some additional information in the Hue app about the bulb model, but even then, I found that it requires information from both the app and from what's printed on the outside of bulb to be sure what the actual...
Some time ago I posted this Raspberry PI DIY Mass Spec using Raman Scattering. It's was something of a cumbersome project though, needing a 3D printer and special heat-resistant plastic giving of carcinogenic fumes during printing. To be blunt it was also not very mobile and interpreting the results was further cumbersome Recently though, I've been told that Arduino, and it's various sensor packages, has matured to the point where it's a usable alternative. Now I realize that a cigarette...

Similar threads

Back
Top