What Are the Functions and Features of an Oscilloscope?

  • Thread starter Thread starter PainterGuy
  • Start date Start date
  • Tags Tags
    Functions
AI Thread Summary
The discussion revolves around understanding the functions and features of an oscilloscope. Key terms like "TRIG LEVEL," "COUPLING," "HOLD OFF," and the "X-Y" button are highlighted as areas of confusion. The user also inquires about the "VAR SWEEP" function, "EXT TRIG" port, and the "CAL" and "GND" settings. A suggestion is made to refer to a Wikipedia article for comprehensive explanations. The user expresses gratitude and indicates they will seek further clarification if needed.
PainterGuy
Messages
938
Reaction score
72
hello everyone,

i was able to get a snap of a oscilloscope. please help me know it's functions.
http://img8.imageshack.us/img8/5408/oscillo.jpg

1:- at the top what do "TRIG LEVEL" and "COUPLING" mean?

2:- on the SOURCE switch what do "LINE" and "EXT" mean?

3:- "HOLD OFF" is used to stabalize the signal?

4:- what does "X-Y" button do?

5:- what is function "VAR SWEEP"?

6:- on left side bottom what does "EXT TRIG" port do?

7:- what do "CAL" and "GND" do on right side at bottom?

i am much graful if you can provide me help. many thanks for any help you can provide me.

cheers
 
Engineering news on Phys.org
painterguy said:
hello everyone,

i was able to get a snap of a oscilloscope. please help me know it's functions.
http://img8.imageshack.us/img8/5408/oscillo.jpg

1:- at the top what do "TRIG LEVEL" and "COUPLING" mean?

2:- on the SOURCE switch what do "LINE" and "EXT" mean?

3:- "HOLD OFF" is used to stabalize the signal?

4:- what does "X-Y" button do?

5:- what is function "VAR SWEEP"?

6:- on left side bottom what does "EXT TRIG" port do?

7:- what do "CAL" and "GND" do on right side at bottom?

i am much graful if you can provide me help. many thanks for any help you can provide me.

cheers

The wikipedia article should answer most of your questions. If you have further questions after reading the article, please post them here.

http://en.wikipedia.org/wiki/Oscilloscope

.
 
berkeman said:
The wikipedia article should answer most of your questions. If you have further questions after reading the article, please post them here.

http://en.wikipedia.org/wiki/Oscilloscope

.

okay. i will try to read this article. will ask you for help.

cheers.
 
I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
Thread 'Electromagnet magnetic field issue'
Hi Guys We are a bunch a mechanical engineers trying to build a simple electromagnet. Our design is based on a very similar magnet. However, our version is about 10 times less magnetic and we are wondering why. Our coil has exactly same length, same number of layers and turns. What is possibly wrong? PIN and bracket are made of iron and are in electrical contact, exactly like the reference design. Any help will be appreciated. Thanks. edit: even same wire diameter and coil was wounded by a...
Thread 'Beauty of old electrical and measuring things, etc.'
Even as a kid, I saw beauty in old devices. That made me want to understand how they worked. I had lots of old things that I keep and now reviving. Old things need to work to see the beauty. Here's what I've done so far. Two views of the gadgets shelves and my small work space: Here's a close up look at the meters, gauges and other measuring things: This is what I think of as surface-mount electrical components and wiring. The components are very old and shows how...
Back
Top