What are the overtones of a clarinet?

  • Thread starter Thread starter gapgirl1010
  • Start date Start date
AI Thread Summary
The clarinet functions as a resonant tube with one closed end, with a fundamental frequency of 147 Hz and a length of 0.583 m. To calculate the first three overtones, understanding the relationship between wavelength and frequency is crucial. The fundamental frequency corresponds to a wavelength that is four times the tube length, while the first overtone involves a different harmonic relationship. The wave equation (v = f λ) can be used to find the wavelengths, but it's not necessary for solving the problem at hand. Visualizing the wave patterns in an open/closed tube can aid in comprehending these relationships.
gapgirl1010
Messages
21
Reaction score
0
A clarinet can be treated as a resonant tube with one closed end. The fundamental frequency is 147 Hz.

I was able to figure out the length of the clarinet: it is .583 m

BUt the question is to calculate the frequencies of the first three overtones.

Would the overtone equatinos used to find the wavelength be
(wave) = 4(length)
(wave) = 2 (length)
wave = length

Or am I completely off track?
 
Physics news on Phys.org
Here's a hint: For the fundamental frequency, the length of the tube equals 1/4 of a wavelength. For the first overtone (the next allowable frequency), how many wavelengths fit into the tube?
 
Doc Al said:
Here's a hint: For the fundamental frequency, the length of the tube equals 1/4 of a wavelength.

How does that work? If the fundamental frequency is 147 Hz
then (147/4) equals the length? =36.75 this is not what I found...

Do I divide by four then?
 
147 Hz is the frequency, not the wavelength! Use the wave equation (v = f \lambda) to find the wavelength, if you want to. But you don't need to find the wavelength or the length of the tube to solve this problem.

What I want you to understand is the relationship between the wavelength of the fundamental frequency and the wavelength of the first harmonic. (If you know how the wavelengths relate, then you should be able to figure out how the frequencies relate via that wave equation.)

Draw yourself a picture of the open/closed tube and draw the fundamental wave.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top