What Are the Possible Values for R in a Parallel/Series Resistor Setup?

  • Thread starter Thread starter NotaPhysicsMan
  • Start date Start date
  • Tags Tags
    Resistors
AI Thread Summary
In a discussion about determining the possible values for resistance R in a parallel and series resistor setup, a user outlines their approach using Ohm's Law and the equations for series and parallel circuits. They initially express concern about their parallel equation but receive clarification on the correct formula for equivalent resistance. After equating the currents from both configurations, they derive a quadratic equation, R^2 - 6R + 4 = 0. Solving this yields two potential values for R: approximately 5.236 ohms and 0.7639 ohms. The calculations and reasoning appear correct, confirming the user's understanding of the problem.
NotaPhysicsMan
Messages
146
Reaction score
0
Ok the question is:

A resistor (resistance=R) is connected first in parallel and then in series with a 2.00 ohm resistor. A battery delivers five times as much current to the parallel combination as it does the series combination. Determine the two possible values for R.

So let's see: I can use I=V/R

For series it's I=V/(R+2)

For parallel it's 5I=V/(1/R+1/2ohm) Ok, now I equate the Currents (I)

and I get V/(R+2)=V/5(1/R+1/2). I can cancel out the V's and I'll have:

Now I solve for R?

Am I on the right track? :confused:
 
Physics news on Phys.org
Your parallel equation is wrong:

R_{eq}=(\frac{1}{R_1}+\frac{1}{R_2}+\cdots+\frac{1}{R_n})^{-1}

So if you say I=\frac{V}{R_{eq}} you end up with:

I=\frac{V}{(\frac{1}{R_1}+\frac{1}{R_2}+\cdots+\frac{1}{R_n})^{-1}}

or more simply:

I={V}{(\frac{1}{R_1}+\frac{1}{R_2}+\cdots+\frac{1}{R_n})}

Your thought process is correct though.

Good luck.
 
Your equation for equivalent resistnace in a parallel circuit is wrong. The correct equation is:

\frac{1}{R} = \frac{1}{R_1} + \frac{1}{R_2}

Otherwise you seem to be on the right track.
 
Ok this is weird. Ok so jumping to the equating of the two equation step...

I get :

V/(R+2)=V/5 x (1/R+1/2). Now, I cancel the Vs and try to solve for R

1/(R+2)=1/5 x (1/R+1/2). Now I bring the 5 over on the otherside and now I will solve and get a quadratic equation:

R^2-6R+4=0. Solving for R's I get R=5.236 and R=.7639 ohm.

It looks right? Thanks.
 
Thread 'Collision of a bullet on a rod-string system: query'
In this question, I have a question. I am NOT trying to solve it, but it is just a conceptual question. Consider the point on the rod, which connects the string and the rod. My question: just before and after the collision, is ANGULAR momentum CONSERVED about this point? Lets call the point which connects the string and rod as P. Why am I asking this? : it is clear from the scenario that the point of concern, which connects the string and the rod, moves in a circular path due to the string...
Thread 'A cylinder connected to a hanged mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top