What Are the Potential and Kinetic Energies of a Swinging Wrecking Ball?

AI Thread Summary
The discussion revolves around calculating the potential and kinetic energies of a wrecking ball with a mass of 315 kg hanging from a 10.0 m cable at a 30-degree angle. The potential energy is determined using the height derived from the vertical distance, specifically L(1 - cosθ), which is crucial for accurate calculations. The kinetic energy is calculated using the formula Ek = 1/2mv^2, and the speed of the wrecking ball is found to be 5.12 m/s according to textbook answers. Participants emphasize the importance of correctly identifying the vertical height for potential energy calculations, which impacts the overall results. Accurate drawings and careful consideration of angles are recommended for solving similar problems effectively.
jaron
Messages
23
Reaction score
0

Homework Statement


a wrecking ball, with a mass of 315kg, hangs from a crane on 10.0m of cable. if the crane swings the wrecking ball so that the angle that the cable makes with the vertical is 30', what is the potential energy of the wrecking ball in relation to its lowest position?
What will be the kinetic energy of the wrecking ball when it falls back to the vertical position?
What will be the speed of the wrecking ball?

Homework Equations


i think i will need to find the distance between the ball and the wall sin30'(10m)
Ek = 1/2mv^2
Eg = mgh

the two questions before i am having a hard time with cause i believe i need the final velocity before hitting wall (the speed in this case) before i can solve the others.
but i could be totally wrong (wuldnt be the first time, ;)

The Attempt at a Solution


sin30'(10) = 5m (this is the distance from the ball to the wall.
after that i do: Ek' + Eg' = Ek + Eg
and i am lost because i know there is something i am not doing but don't know what.

Ek' + Eg' = Ek + Eg
1/2mv^2 + mgh = 1/2mv^2 + mgh (mass canceled)
1/2v^2 + (-9.81)(5) = 1/2(0) + 9.81(0) (1/2 canceled)
v^2 = 49.1
v = 7m/s
this is the speed of the wrecking ball that i get.

the answers in my textbook are:
- Eg = 4140 J
- Ek = 4140 J (these two make sense because the two equal one another always
- V = 5.12m/s
---------------------------------------
any help is always appreciated
 
Physics news on Phys.org
sin30'(10) = 5m (this is the distance from the ball to the wall.

Make a drawing and be a little more careful. That is the horizontal distance. But it is not the vertical distance the ball is above the point of impact. It's the vertical distance that determines the m*g*h
 
i had tried cos 30'(10) = 8.6m
but i figured since the actual movement was the horizontal distance you would assume it to be the height (like a horizontal fall)?

and with that i just end up getting 9.2m/s for my speed. still wrong
 
jaron said:
i had tried cos 30'(10) = 8.6m
but i figured since the actual movement was the horizontal distance you would assume it to be the height (like a horizontal fall)?

and with that i just end up getting 9.2m/s for my speed. still wrong

If you drew the picture you would see that L*cosθ is the length from the top. But potential energy is how high the bottom of L it is, so what you are interested in is L*(1 - cosθ)
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top