What charge circulates through the coil?

  • Thread starter Thread starter moenste
  • Start date Start date
  • Tags Tags
    Charge Coil
AI Thread Summary
The discussion centers on calculating the charge that circulates through a coil when it is rotated in a magnetic field. The correct formula for charge is established as Q = N A B (Δ cos θ) / R, where N is the number of turns, A is the area, B is the magnetic flux density, and R is the resistance. Participants clarify the importance of considering the change in flux due to the coil's rotation, specifically from 0° to 180°, which results in a total change in flux that leads to a charge of 100 μC. Miscalculations are addressed, particularly regarding the use of the flux density and area in the formula. Ultimately, the correct understanding of the relationship between the coil's rotation and the induced charge is reached.
moenste
Messages
711
Reaction score
12

Homework Statement


Describe and account for two constructional differences between a moving-coil galvanometer used to measure current and the ballistic form of the instrument.

An electromagnet has plane-parallel pole faces. Give details of an experiment, using search coil and ballistic galvanometer of known sensitivity, to determine the variation in the magnitude of the magnetic flux density (magnetic induction) along a line parallel to the pole faces and mid-way between them. INdicate in qualitative terms the variation you would expect to get.

A coil of 100 turns each of area 2.0 * 10-3 m2 has a resistance of 12 Ω. It lies in a horizontal plane in a vertical magnetic flux density of 3.0 * 10-3 Wb m-2. What charge circulates through the coil of its ends are short-circuited and the coil is rotated through 180 ° about a diametral axis?

Answer: 100 μC.

2. The attempt at a solution
We need to find charge Q. Q = N A B / R. We don't know B. B = (d Φ / d A) * A = 3 * 10-3 * 2 * 10-3 = 6 * 10-6 T.

So Q = 100 * 2 * 10-3 * 6 * 10-6 / 12 = 1 * 10-7 C.

The correct answer is 100 * 10-6 C or 10-4 or 0.00 01. While my answer is 10-7 or 0.00 00 00 1.

What's wrong?
 
Last edited:
Physics news on Phys.org
Hi Moenste,

You multiply the flux density with the area twice !
1 Wb/m2 = 1 T

And if you turn the coil over 180 degrees, how much does the flux change ?
 
  • Like
Likes moenste
BvU said:
Hi Moenste,

You multiply the flux density with the area twice !
1 Wb/m2 = 1 T

And if you turn the coil over 180 degrees, how much does the flux change ?
Hi BvU,

Hm, you mean that d Φ / d A = B? Update: T = kg / s2 A and Wb / m2 = kg m2 / m2 s2 A = kg / s2 A = T.

Q = 100 * 2 * 10-3 * 3 * 10-3 / 12 = 5 * 10-5 C.

Not sure, but maybe it should become negative?
 
Let me ask stepwise: what's the change in flux if you rotate 90 degrees ? And then another 90 degrees ? :smile:

(and yes,: if it becomes negative, what's the total change ?)
(By the way, I now end up a factor of 10 too high compared to the book; my mistake ?)​
 
  • Like
Likes moenste
BvU said:
Let me ask stepwise: what's the change in flux if you rotate 90 degrees ? And then another 90 degrees ? :smile:

(and yes,: if it becomes negative, what's the total change ?)
(By the way, I now end up a factor of 10 too high compared to the book; my mistake ?)​
The answer is 100 μC, not 10 μV, I was changing that while you replied. Sorry for that.
 
Factor 2 clear ? (if so : Well done ! )

(hehe o and colon gives unintended egg on face )
 
  • Like
Likes moenste
BvU said:
Let me ask stepwise: what's the change in flux if you rotate 90 degrees ? And then another 90 degrees ? :smile:

(and yes,: if it becomes negative, what's the total change ?)
(By the way, I now end up a factor of 10 too high compared to the book; my mistake ?)​
BvU said:
Factor 2 clear ? (if so : Well done ! )

(hehe o and colon gives unintended egg on face )
No, still calculating. Just fixed the book answer.

Φ = A B cos θ = 2 * 10-3 * 3 * 10-3 cos 180 ° = - 6 * 10- 6 Wb?
 
##\Delta \Phi = ...\cos \pi \ - ...\cos 0 ## !
 
  • Like
Likes moenste
BvU said:
##\Delta \Phi = ...\cos \pi \ - ...\cos 0 ## !
Maybe every 90 ° the flux is equal to zero?

But in that case Q = N A B / R = N A * 0 / R = 0.

And if we found the charge Q (C) already, why do we need to find flux Φ (Wb)?

Update
Maybe we need to update the formula to: Q = (N A B cos θ) / R = [100 * (2 * 10-3) * (3 * 10-3) * cos 180 °] / 12 = - 5 * 10-5 C?
 
Last edited:
  • #10
We needed that to find the charge of 10-4 C that circulates.
 
  • Like
Likes moenste
  • #11
BvU said:
We needed that to find the charge of 10-4 C that circulates.
I'm sorry, still don't quite understand. Could you please tell what is wrong and what is correct in my calculations? At this moment I'm not sure whether something is correct or everything is wrong.

I also don't understand what you mean "find charge that circulates". Q = (N A B cos θ) / R isn't it it?
 
  • #12
moenste said:
Q = (N A B cos θ) / R isn't it it?
No. If you hold the doil still, no charge flows. $$Q =\Delta (N A B \cos \theta) / R$$
 
  • Like
Likes moenste
  • #13
BvU said:
No. If you hold the doil still, no charge flows. $$Q =\Delta (N A B \cos \theta) / R$$
The only difference is delta: Q = [(N A B cos θ) / R] - [(N A B cos θ) / R]. But what do we plug into the second pair? Only the angle change from 0 to 180 °.

Q = [(N A B cos θ) / R] - [(N A B cos θ) / R] = - 5 * 10-5 - 5 * 10-5 = - 1 * 10-4 C. A negative one...
 
  • #14
Correct. In fact I should have placed N and R in front of the ##\Delta##
 
  • Like
Likes moenste
  • #15
BvU said:
Correct. In fact I should have placed N and R in front of the ##\Delta##
Hm, so it's Q = N A B [Δ (cos θ)] / R?

Q = N A B (cos θInitial - cos θFinal) / R = [100 * (2 * 10-3) * (3 * 10-3) * (cos 0 ° - cos 180 °)] / 12 = 1 * 10-4 C.

Correct?
 
  • #16
Must be. But you should convince yourself that it is (and thereby no longer have to ask).

PF isn't very good at stamp-approving things :smile: (gets them in trouble with teachers and such).

However, if you want an opportunity for improvement: put absolute sign delimiters around things to avoid a red minus sign afterwards :rolleyes:
 
  • Like
Likes moenste
  • #17
BvU said:
Must be. But you should convince yourself that it is (and thereby no longer have to ask).

PF isn't very good at stamp-approving things :smile: (gets them in trouble with teachers and such).

However, if you want an opportunity for improvement: put absolute sign delimiters around things to avoid a red minus sign afterwards :rolleyes:
It could be rephrased as " did I understand it correctly?" : ).
 
  • #18
I think you did..:wink:
 
  • Like
Likes moenste
Back
Top