What happened with my water bottle

  • Thread starter Thread starter Pengwuino
  • Start date Start date
  • Tags Tags
    Water
AI Thread Summary
A user experienced a peculiar incident while opening a water bottle, where twisting the cap created a powerful suction that deformed the bottle. The discussion suggests that this could be due to a vacuum effect caused by the bottle being sealed at a higher temperature, leading to a decrease in volume as it cooled. Several participants noted similar experiences with bottles, particularly after refrigeration or freezing, where pressure changes can cause deformation or explosive release of contents. The consensus leans towards the idea that internal pressure dynamics, possibly from cooling, led to the unusual suction effect. Overall, the phenomenon highlights interesting aspects of physics related to pressure and temperature in sealed containers.
Pengwuino
Gold Member
Messages
5,112
Reaction score
20
I had the oddest thing happen to me this morning. I was opening a water bottle... you know, bottled water that's $1 a bottle :smile: :smile: not really.. but yah, so i twisted open this bottle's cap about half a revolution and for some reason, it created a suction so poweful that it deformed the bottle and refused to open. I later had to just cut the little things attaching the cap and that ring to get it open.

Anyone have a clue what in the world happened here?

Is it possible that it was literally full of water and i was producing a vacuum in there and if so, how strong of a vacuum could really have existed in there? I got all wet because of it!
 
Physics news on Phys.org
Did you find any liquified air in the bottom of the container? That might have something to do with it.
 
Not that i remember. This was a simple bottle of water.
 
You could have had an issue like what is done, on purpose in canning. If the water was bottled and capped at a higher temperature, once the cap was in place, the water cools and volume decreases, causing a vacuum under the sealed cap.
 
Was it bottled in Colorado or someplace higher?
 
Pengwuino said:
... i twisted open this bottle's cap about half a revolution and for some reason, it created a suction so poweful that it deformed the bottle and refused to open...
Can you clarify?

Was the vacuum in there before you tried to open it, or are you saying that your attempt to open it caused the suction?

Did it simply begin to deform as soon as you broke the seal?

Or do you mean you twisted the cap ON?
 
My very first attempt to open the new bottle of water created the suction. No seal had broken or anything, it just started making the vacuum. It was bottled "Near California's Mount Shasta" at the "CG (crystal gyser) Roxane Source". Not sure how high it was but I've never had this happen to a bottle from them!
 
I've had this occassionaly happen with plastic cola-filled bottles, so, I know what you mean. As I start to un-twist the cap, the damn bottle collapses(squeezes in on it's own) and sprays me with cola.
 
Pengwuino said:
I got all wet because of it!
Wow ! Physics does excite you !

As for the weird bottle thing, some parts of the description are a bit confusing. If the air above the water was at a low pressure, cracking the cap will only cause air to rush in the tiny gaps and equilibrate the inside to atmosphere. I've often experienced this. A partially consumed bottle of water, after some refrigeration, will become wobbly. Cracking the cap fills it out and steadies it.

My best guess now is that cracking the cap caused air to seep in and increase the pressure inside the bottle. This increase in internal pressure resulted in a uniform outward stress on all parts of the bottle and cap. Now if the cap were made of stiffer or thicker material than the neck of the bottle (which I assume is plastic), the bottle-neck would want to expand more than the cap, but it can't. This causes the exerienced jamming.
 
  • #10
Gokul, the problem was that it deformed inwards, not outwards. It was weird because when i opened it at that half revolution or whatever, it became impossibly hard to continue opening. It's as if i tightened the bottle when i tried to untighten it. And no, I'm not stupid and wasn't trying ot close it :P
 
  • #11
On further thought, its happened to me before. With a pepsi in a freezer, and water bottles in the freezer. When I open it, they collapse. Not as violent as your situation Pengwuino, but it happens. Also, my waters tend to explode when I open them after they've been filled too much for freezing.
 
  • #12
My guess is, there was low pressure inside the bottle from cooling but not enough to pass some critical point to deform inward. When you were holding the bottle you put enough pressure to get past this critical point allowing the low pressure to keep it sucked in.
 
  • #13
Pengwuino said:
Gokul, the problem was that it deformed inwards, not outwards.
What part of the bottle deformed ?
Was it a regular plastic bottle ?
What happened when you did finally get it open ?
 

Similar threads

I Pressure: Sealed bottle physics
Replies
29
Views
4K
I How can visible gas bubbles remain intact inside frozen water?
Replies
8
Views
1K
A bottle of water at 0'C is opened on the surface of moon. What happens and why?
Replies
10
Views
8K
I Pressure builds on its own inside this water tank?
Replies
21
Views
3K
Sudden Phase change of water to ice
Replies
4
Views
6K
Rolling a half full water bottle and simple harmonic motion
Replies
4
Views
7K
Why did my glass bottle explode?
Replies
1
Views
4K
Safe to Empty a "Pee Bottle" After 13 Days?
Replies
11
Views
8K
Strange Nucleation Sites Inside a Diet Pepsi Bottle?
Replies
3
Views
3K
Can someone explain the vacuum pressure created by water pressure on waders?
Replies
9
Views
5K

Hot Threads

Recent Insights

Back
Top