What is Nonholonomic Constraint Navigation for Mobile Robots?

  • Thread starter Thread starter enigma
  • Start date Start date
  • Tags Tags
    Mean
AI Thread Summary
Nonholonomic constraint navigation refers to mobile robot navigation that adheres to specific movement limitations, particularly in environments with obstacles. A proposed collision-free path planner utilizes distance information to navigate effectively, mapping obstacles as linear constraints in velocity space. This method allows the robot to determine safe velocities that avoid collisions while maintaining stability and quick calculation times. The planner operates through two main modules: "reaching the goal" and "boundary following." The approach demonstrates significant effectiveness in addressing collision-free path planning challenges.
enigma
Staff Emeritus
Science Advisor
Gold Member
Messages
1,738
Reaction score
20
Does anyone know what this term means?

dictionary.com comes up blank

Abstract:
This paper presents a collision-free path planner for mobile robot navigation in an unknown environment subject to nonholonomic constraints. This planner is well adapted for use with embarked sensors because it uses only the distance information between the robot and the obstacles. The collision-free path planning is based on a new representation of the obstacles in the velocity space. The obstacles in the influence zone are mapped as linear constraints into the velocity space of the robot, forming a convex subset that represents the velocities that the robot can use without collision with the objects. The planner is composed by two modules, termed "reaching the goal" and "boundary following". The major advantages of this method are the very short calculation time and a continuous stable behavior of the velocities. The results presented demonstrate the capabilities of the proposed method for solving the collision-free path-planning problem.
 
Engineering news on Phys.org
Nevermind,

Found it:

http://www.nd.edu/NDInfo/Research/sskaar/Comparison.html
 
Last edited by a moderator:
How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'
Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
I'd like to create a thread with links to 3-D Printer resources, including printers and software package suggestions. My motivations are selfish, as I have a 3-D printed project that I'm working on, and I'd like to buy a simple printer and use low cost software to make the first prototype. There are some previous threads about 3-D printing like this: https://www.physicsforums.com/threads/are-3d-printers-easy-to-use-yet.917489/ but none that address the overall topic (unless I've missed...
Back
Top