What is the magnitude of the average force exerted on the ball by the wall?

  • Thread starter Thread starter cdubsean
  • Start date Start date
  • Tags Tags
    Force
cdubsean
Messages
11
Reaction score
0

Homework Statement



A 4 kg steel ball strikes a wall with a speed
of 16 m/s at an angle of 50.6◦ with the normal
to the wall. It bounces off with the same
speed and angle, as shown in the figure.

http://img517.imageshack.us/img517/4498/physicspic1.png"


If the ball is in contact with the wall for
0.277 s, what is the magnitude of the average
force exerted on the ball by the wall?
Answer in units of N.



Homework Equations



Im = mvsin(8)i+mvcos(8)j
Fm= -mvsin(8)i+mvcos(8)j
Impulse = Fm - I am
Force average = Impulse/Time

8 = THeta

The Attempt at a Solution



Im = (4kg)(16m/s)(sin39.4) + (4kg)(16m/s)(cos39.4) = 90.078

Fm = -(4kg)(16m/s)(sin39.4) + (4kg)(16m/s)(cos39.4) = 8.832

Impulse = (8.832)-(90.078) = -81.246 Which I also found Impulse = -2(Mass)(Velocity)(Sin(8))

Then F adv= (-81.246)/ .227s = -357.912 N

This should be the case, but apparently I am wrong, can some one help me find my mistake, and I am aware I am useing a different angle than what is given, I am using the angle off the wall. So instead of 50.6 degrees, I am using 39.4 degrees. :) Help Plz.
 
Last edited by a moderator:
Physics news on Phys.org
cdubsean said:
Im = (4kg)(16m/s)(sin39.4) + (4kg)(16m/s)(cos39.4) = 90.078

Fm = -(4kg)(16m/s)(sin39.4) + (4kg)(16m/s)(cos39.4) = 8.832

You cannot add the x and y components of the momentum vectors like this. It is meaningless and incorrect. To find the impulse, you need to subtract x-xomponent from x-component and y-component from y-component.
 
I have found my error. I plugged in .227 seconds instead of .277 seconds to get the right answer.

And to kuruman... I can and it worked. basically, what i did was found the momentum going in minus the momentum going out, the devided by the correct time to get the adverage force.

so the momentum going in is both a x and y component minus the x( in this case negative) and y.

So final is

Then F adv= (-81.246)/ .277s = -293.307 N But since we are looking for the magnatude of the average force we make the answer positive.

= 293.307 N which is correct.
 
And to kuruman... I can and it worked.

It worked essentially by dumb luck. The correct expression involves the change in momentum in the direction perpendicular to the wall only. That is take

(4kg)(16m/s)(sin39.4)-(-(4kg)(16m/s)(sin39.4))

and divide by 0.227 seconds.

You added and subtracted the other component, (4kg)(16m/s)(cos39.4), so you ended up with the right answer. The fact that you got the right answer in this particular problem does not justify adding x and y components of vectors (as you have done) for all problems that you will have to face in the future. Of course you can do what you want, but don't be surprised if it doesn't work the next time you try something like this.
 
Would that be the same as I wrote above in the third part of my equations...

cdubsean said:
3. The Attempt at a Solution

Im = (4kg)(16m/s)(sin39.4) + (4kg)(16m/s)(cos39.4) = 90.078

Fm = -(4kg)(16m/s)(sin39.4) + (4kg)(16m/s)(cos39.4) = 8.832

Impulse = (8.832)-(90.078) = -81.246 Which I also found Impulse = -2(Mass)(Velocity)(Sin(8))

but what you wrote down is the same thing but without the negative, since we are talking about momentum of average force which should be positive. So I originally had it to start with, but negative because I was using the ball's x component away from the wall as a negative, but simple fix :)

But thanks for letting me know that I can't add these, I will ask my professor about it and see if he can help explain further.
 
Thread 'Need help understanding this figure on energy levels'
This figure is from "Introduction to Quantum Mechanics" by Griffiths (3rd edition). It is available to download. It is from page 142. I am hoping the usual people on this site will give me a hand understanding what is going on in the figure. After the equation (4.50) it says "It is customary to introduce the principal quantum number, ##n##, which simply orders the allowed energies, starting with 1 for the ground state. (see the figure)" I still don't understand the figure :( Here is...
Thread 'Understanding how to "tack on" the time wiggle factor'
The last problem I posted on QM made it into advanced homework help, that is why I am putting it here. I am sorry for any hassle imposed on the moderators by myself. Part (a) is quite easy. We get $$\sigma_1 = 2\lambda, \mathbf{v}_1 = \begin{pmatrix} 0 \\ 0 \\ 1 \end{pmatrix} \sigma_2 = \lambda, \mathbf{v}_2 = \begin{pmatrix} 1/\sqrt{2} \\ 1/\sqrt{2} \\ 0 \end{pmatrix} \sigma_3 = -\lambda, \mathbf{v}_3 = \begin{pmatrix} 1/\sqrt{2} \\ -1/\sqrt{2} \\ 0 \end{pmatrix} $$ There are two ways...
Back
Top