What is the moment of inertia of Earth about its center?

AI Thread Summary
The discussion focuses on calculating the moment of inertia of Earth using its density function, which varies with distance from the center. The approach involves integrating the contributions of infinitesimally thin hollow spheres, leading to the equation I = 2/3 ∫ r^2 dm. A mistake was identified in the computation of the volume differential dV, which affected the final result. After correcting the math, the correct moment of inertia was confirmed to be I = 0.330 MR^2. The discussion highlights the importance of accurate calculations in deriving physical properties.
discordplus
Messages
9
Reaction score
0

Homework Statement



The density of Earth, at any distance r from it's center is approximately

p(r) = [14.2 - 11.6 (r/R)] * 10^3 kg*m^-3

where R is the radius of the Earth. Show that the density leads to a moment of inertia I = 0.330 MR^2 about an axis through the center, where M is the mass of the Earth.

Homework Equations



I = \int r^2 dm
I of a hollow sphere = 2/3MR^2
I = \int dI

The Attempt at a Solution



So what I believe is right is to sum up the contributions of the moments of inertia of infinitesimally thin hollow spheres, with limits of integration 0 to R.

So, I have a hollow sphere with thickness dr a distance r from the center of the Earth, whose moment is given by 2/3MR^2 so I have:

I = 2/3 \int [R,0] r^2 dm

dm would be p(r) dV

dV should be 4/3\pi(r+dr)^3 - 4/3\pir^3 because the all the mass is concentrated at the outside of the shell of thickness dr. This equals 3r^2dr.

So. 2 \int p(r) * 3r^2 * r^2 dr = I

integrating with limits [R,0] and substituting in the actual values i got about 2 * 10^37 kg * m^2, but the answer is 8 * 10^37 kgm^2.

What did I do incorrectly?
 
Physics news on Phys.org
discordplus said:
dV should be 4/3\pi(r+dr)^3 - 4/3\pir^3 because the all the mass is concentrated at the outside of the shell of thickness dr. This equals 3r^2dr.
That's not correct. Check your math on that differential. (I mean: you're right that \mathrm{d}V = \frac{4}{3}\pi(r + \mathrm{d}r)^3 - \frac{4}{3}\pi r^3, you just computed the difference incorrectly.)
 
Oh, I forgot to move the 4pi/3 down. Wow. It came out to the right answer after that. Thanks.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Collision of a bullet on a rod-string system: query'
In this question, I have a question. I am NOT trying to solve it, but it is just a conceptual question. Consider the point on the rod, which connects the string and the rod. My question: just before and after the collision, is ANGULAR momentum CONSERVED about this point? Lets call the point which connects the string and rod as P. Why am I asking this? : it is clear from the scenario that the point of concern, which connects the string and the rod, moves in a circular path due to the string...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top