What is the nominal conductor diameter in generator winding?

DUET
Messages
55
Reaction score
0
What is "nominal Conductor diameter"(in generator winding)?
 
Engineering news on Phys.org
Kind of an average, allows for some variation in the diameter - since the winding makes up a large thermal mass, some points may be thinner and not have an overall detrimental effect.
 

Thread '3-terminal device external modeling'

Very basic question. Consider a 3-terminal device with terminals say A,B,C. Kirchhoff Current Law (KCL) and Kirchhoff Voltage Law (KVL) establish two relationships between the 3 currents entering the terminals and the 3 terminal's voltage pairs respectively. So we have 2 equations in 6 unknowns. To proceed further we need two more (independent) equations in order to solve the circuit the 3-terminal device is connected to (basically one treats such a device as an unbalanced two-port...
View full post »

Thread 'Two capacitors, etc.'

suppose you have two capacitors with a 0.1 Farad value and 12 VDC rating. label these as A and B. label the terminals of each as 1 and 2. you also have a voltmeter with a 40 volt linear range for DC. you also have a 9 volt DC power supply fed by mains. you charge each capacitor to 9 volts with terminal 1 being - (negative) and terminal 2 being + (positive). you connect the voltmeter to terminal A2 and to terminal B1. does it read any voltage? can - of one capacitor discharge + of the...
View full post »

Similar threads

Can Spinning a Conductor Between Charged Plates Generate Current?
Replies
5
Views
1K
Maxwell 3D number of conductors question
Replies
3
Views
2K
Modifying generator windings to convert output from 220V to 55V.
Replies
8
Views
2K
Force on a current carrying conductor
Replies
6
Views
2K
Heating of a conductor (1000 turn coil)
Replies
19
Views
2K
EMI Shielding Effectiveness with Various Conductor Thicknesses
Replies
12
Views
2K
Maximum power from a transformer
Replies
8
Views
3K
Human Resistance vs. Circuit Conductors
Replies
6
Views
1K
MMF diagrams of transformer construction options
Replies
9
Views
2K
How to calculate iron losses in a steel ring around a conductor?
Replies
17
Views
2K

Hot Threads

Recent Insights

Back
Top