What is the question looking for?

  • Thread starter Thread starter I_LuV_FiZiX
  • Start date Start date
AI Thread Summary
The discussion revolves around determining the position vector of a mouse at point C, given its starting position and the coordinates of point C. The coordinates of point C are confirmed as (3 m, -5.4 m). The user initially struggled with the correct format for the answer, mistakenly entering values in degrees and meters. Clarification was provided that the position vector should reflect the change in position from the mouse's starting point to point C. The user ultimately understood that the correct approach involves calculating the changes in both the x and y directions from the original position.
I_LuV_FiZiX
Messages
27
Reaction score
0

Homework Statement


A mouse starts at position (-2 m, 0.5 m), relative to a piece of cheese at the origin, and follows the path shown in the x-y graph below. Find the position vector of the mouse at point C and enter your answer in component form.



Homework Equations


The co-ordianates of point C are (3 m, -5.4m)


The Attempt at a Solution


Well I can't put a picture of the graph up on here, so if there is any information left out that the graph may contain please let me know.

There are 2 answer slots, one for each component of the answer i guess. In my first attempt I entered 8.84m in the first slot and 38degrees in the second (obtained these from constructing a triangle and using trigonometry), but i was told my units must both be meters. So I put in the co-ordinates of the point itself and that is still wrong. Any help would be greatly appreciated
 
Physics news on Phys.org
The first component is the x and the second is the y. I'm assuming the path the mouse took was a straight line so basically you compare the points in terms of change in x and change in y. How much did the mouse move in the x direction to get to point C? How much did the mouse move in the y direction to get to point C?

I'm not 100% if this is correct (assumed a straight line) but this seems to be the way to approach the problem.
 
change in x and change in y from where? the origin? Those would just be the co-ordinates of the point C, which i already entered, wouldn't they?
 
No, it is the change from where the mouse orginally started (-2m, .5m).
 
Oh okay thanks! I got it now.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top