What is the value of ω for a RLC AC circuit with given parameters?

AI Thread Summary
The discussion centers on determining the correct value of angular frequency (ω) for calculating the reactance of a capacitor in an RLC AC circuit. The given parameters include resistance, inductance, capacitance, and frequency. Participants clarify that ω should be calculated using the formula ω = 2πf, where f is the frequency in Hertz. There is confusion regarding the terminology used by the teacher, who refers to ω as frequency rather than angular frequency. Ultimately, it is emphasized that ω is measured in radians per second, while frequency is in Hertz.
musiliu
Messages
43
Reaction score
0

Homework Statement



I am given a RLC circuit with a AC power source (e.g. signal generator), and i want to find the reactance of the capacitor.

Given: R = 2200 Ohms, L = .025 H, C = (1 x 10-9) F, V0 = 5 V
f = 3000 Hz

Homework Equations



edit: Sorry i wrote wrong formula.. here is the correct one:

Reactance of Capacitor = 1 / ω C

The Attempt at a Solution



I know how to solve this problem, but i am not sure what value to use for ω.

My teacher refers to ω as the "frequency", but isn't it supposed to be ω = 2 pi f ?

So, simply put, am i supposed to use the 3000 Hz as my ω, or do i use 2 pi f as my ω?
 
Last edited:
Physics news on Phys.org
Use ω = 2 π f. Also there is no V0 in the reactance.
 
i learned that ω is the angular frequency.. so am i supposed to use ω = 2 pi f for this problem? i am confused since my teacher keeps calling ω the frequency and not the angular frequency...
 
musiliu said:
i learned that ω is the angular frequency.. so am i supposed to use ω = 2 pi f for this problem? i am confused since my teacher keeps calling ω the frequency and not the angular frequency...
It is a bit confusing at first because your teacher is cutting corners. You can tell whether one is talking about ω or about f by looking at the units. When you see rad/s (or s-1), it is ω. When you see Hz (or cycles per second), it is f.
 
Thread 'Collision of a bullet on a rod-string system: query'
In this question, I have a question. I am NOT trying to solve it, but it is just a conceptual question. Consider the point on the rod, which connects the string and the rod. My question: just before and after the collision, is ANGULAR momentum CONSERVED about this point? Lets call the point which connects the string and rod as P. Why am I asking this? : it is clear from the scenario that the point of concern, which connects the string and the rod, moves in a circular path due to the string...
Thread 'A cylinder connected to a hanged mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top