What is the Work Done in a Ski Rescue?

  • Thread starter Thread starter fishert16
  • Start date Start date
  • Tags Tags
    Friction
AI Thread Summary
The discussion focuses on calculating the work done during a ski rescue involving a sled and victim on a slope. Key calculations include determining the work done by friction, the work done by the rope, and the gravitational work as the sled descends 30 meters at a 60-degree angle. Participants emphasize the importance of understanding the forces acting on the sled, including friction, and the need for a free body diagram to visualize these forces. The coefficient of friction is noted as 0.100, and the total mass of the sled and victim is 90 kg. Proper application of mechanical work definitions and relevant formulas is crucial for solving the problem accurately.
fishert16
Messages
19
Reaction score
0
Suppose the ski patrol lowers a rescue sled and victim 30m down a slope at a constant speed as shown below. The victim and sled have a total mass of 90kg. The angle of the slope is 60 degrees.

If the coefficient of friction is 0.100.
a) Find the work done by friction as the sled moves down the hill.
b) how much work is done by the rope on the sled.
c) What is the work done by gravitation.
d) What is the total work done.

Not sure where to start here. Any help with starting would be apprecitated.
 
Physics news on Phys.org
Make a schematic drawing with the sled and the slope. Draw all forces. Maybe it can help if you use two different colors for the forces exerted on the sled and the forces exerted by the sled. Compute the normal force and the friction force. Compute work done by the sled on the snow and on the rope. Do not forget, in the definition of mechanical work, the directions of forces and displacements.
 
Start with the first one by actually finding friction. And if you remember the definition of work, you should know to multiply it in the distance moved in that direction.

Same concept applies for the other 2 thought the final one is a bit different,
 
Formulas

Are there any formulas i should know for this particular problem. The thing that confuses me is that I know how to figure friction work, but i do not know how to find this with an angle involved.
 
The force due to friction is the coefficient of friction times the force perpendicular (normal) to the surface between the two things. If you are on the sled, the force to glide the sled over a horizontal snow will be 0.1 times your weight. But in the problem the surface is not horizontal. You must find the component of the weight perpendicular to the slope.
 
Constructing a proper free body diagram can be extremely useful in solving these types of problems. You can get some hints if you click on the first tutorial in my footer and open the pdf called motion3b.pdf
 

Thread 'Errors and significant figures'

I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
View full post »
Thread 'A cylinder connected to a hanging mass'

Thread 'A cylinder connected to a hanging mass'

Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
View full post »

Similar threads

Finding the angle of an inclined plane
Replies
2
Views
2K
What is the Work Done on the Person+Sled System in an Amusement Park Ride?
Replies
1
Views
1K
Acceleration = (Force of boy on sled - Force of friction)/Mass of sled
Replies
3
Views
2K
What is the work done by gravitation
Replies
3
Views
1K
Inclined plane problem strange result
Replies
3
Views
6K
What's the coefficient of kinetic friction?
Replies
8
Views
3K
Work and Kinetic Energy of a Sled
Replies
4
Views
5K
Newton's Law: sliding down a slope
Replies
1
Views
2K
What is the weight of the sled being pulled up a ramp by a girl?
Replies
1
Views
2K
Work done on incline with friction
Replies
8
Views
8K

Hot Threads

Recent Insights

Back
Top