What Materials and Features Distinguish Cheap from Premium Lighters?

  • Thread starter Thread starter prathu41
  • Start date Start date
  • Tags Tags
    parts
AI Thread Summary
The discussion highlights the materials used in cigarette lighters, noting that cheaper lighters typically use tin or plated steel for the exterior and polystyrene or polypropylene for the liquid holder. These materials are chosen for their cost-effectiveness and ability to withstand flame temperatures without melting. In contrast, premium lighters like Zippos are designed for longevity, using naptha oil and a wick, which adds to their value as both functional items and fashion accessories. The differences in price between cheap and premium lighters stem from material quality, durability, and brand reputation. Overall, the conversation emphasizes that while cheaper lighters are disposable, premium options offer enhanced features and longevity.
prathu41
Messages
3
Reaction score
0
was just curious to know what a cigarette lighter made of what metal they use in the exterior where the light comes out.what kind of plastic is used to hold the liquid?will the metal melt off if its switched on for a while? what's the difference between a $1 lighter and the $24 zippo lighter , other than the price?
 
Engineering news on Phys.org
Not sure why this is in General Physics, but oh well. The answer to most of your questions is:
Whatever's cheap, while still being capable of doing the job.

Metal: probably tin or plated steel, something that's cheap, easy to work with, and won't severely oxidize when the lighter is used, or worse yet, melt under the likely flame temperature.

Plastic: polystyrene or polypropylene or something similar that'll resist the pressure they put the butane under, and won't be dissolved by the same lighter fluid. Oh yeah, did I mention cheap?

The Zippo (and similar lighters) aren't designed to be disposable lighters (they also use naptha oil, and a wick instead of liquidified butane). They're designed to last a long(ish) time, and possibly be used even as a fashion accessory. You're paying for all of the above, and probably for the brand name and premium as well.
 
tanx for the info
 
prathu41 said:
was just curious to know what a cigarette lighter made of what metal they use in the exterior where the light comes out.what kind of plastic is used to hold the liquid?will the metal melt off if its switched on for a while? what's the difference between a $1 lighter and the $24 zippo lighter , other than the price?

the lighter can divide two type: gas lighter and liquid lighter, it will burn out if it made of plastic, the metal will not melt off its switched on for a while.the price for a real zippo lighter at least over $1, you can distinguish from its weight heat resistant grade and flame,wind prevent capacity, such as, the weight of the real is more lighter than the imitation. and it will burn itself off even if I have bought one of http://www.uxsight.com/category/168555/cigarette-lighter.html" from a website store, I'd like to share with you, you can have a look if you are free.
 
Last edited by a moderator:
I have Mass A being pulled vertically. I have Mass B on an incline that is pulling Mass A. There is a 2:1 pulley between them. The math I'm using is: FA = MA / 2 = ? t-force MB * SIN(of the incline degree) = ? If MB is greater then FA, it pulls FA up as MB moves down the incline. BUT... If I reverse the 2:1 pulley. Then the math changes to... FA = MA * 2 = ? t-force MB * SIN(of the incline degree) = ? If FA is greater then MB, it pulls MB up the incline as FA moves down. It's confusing...
Hi. I noticed that all electronic devices in my household that also tell time eventually lag behind, except the ones that get synchronized by radio signal or internet. Most of them are battery-powered, except my alarm clock (which runs slow as well). Why does none of them run too fast? Deliberate design (why)? Wrong temperature for quartz crystal? Decreasing battery voltage? Or just a coincidence?
Back
Top