Which Electrode Builds Up Metal Precipitate in a Galvanic Cell?

AI Thread Summary
In a galvanic cell, the cathode is the electrode where metal plating occurs, as it is the site of reduction where metal cations gain electrons. The cathode's surface is rich in electrons, not positive charge, which allows it to attract metal cations from the solution. The misconception that the cathode contains metal cations is clarified, as these cations are typically in solution and are reduced upon contact with the cathode's surface. Both electrodes serve as conductors surrounded by ions, with reactions occurring only at their surfaces. Understanding these principles is essential for grasping the functioning of galvanic cells.
blueblueblue
Messages
5
Reaction score
0

Homework Statement



In a galvanic cell, the electrode that builds up a precipitate of metal (known as plating out) is:
A. the cathode, and its surface is rich in positive charge.
B. the anode, and its surface is rich in positive charge.
C. the cathode, and its surface is rich in electrons.
D. the anode, and its surface is rich in electrons.

Homework Equations


----N/A----

The Attempt at a Solution



I guess my dilemma revolves around the solution that the book gave. The book: "Answer C. The cathode is defined as the electrode at which reduction occurs. This eliminates choices B and D. Metal cations are converted into metal at the cathode. For a cation to be converted into a metal, it must gain electrons (undergo reduction), so the surface of the cathode must be rich in electrons."

I understand that reduction and metal plating occurs at the cathode, my problem is the second part of the answer. Wouldn't the cathode be rich in positive charge? My understanding is that the cathode contains the metal cations, which will eventually pick up the electrons coming from the anode. I can also understand that the cathode would gather electrons on its surface so that metal cations can pick them up. However, I'm more inclined to pick A than C. Please help! Thanks in advance.
 
Physics news on Phys.org
Would be positively charged cathode able to attract cations?

Cathode doesn't contain metal cations, they get reduced the moment they touch the surface.

--
methods
 
Borek said:
Would be positively charged cathode able to attract cations?

Cathode doesn't contain metal cations, they get reduced the moment they touch the surface.

Oh, so are the metal cations usually in solution? I was always under the assumption that the cathode was a metal plate containing the metal cations. At least that's what it looks like every time I see a simple diagram of a galvanic cell.

So is the cathode electrode just a conductor allowing electrons to gather on its surface, which attracts metal cations from the cathode solution allowing reduction to occur?

Thanks for your response! :smile:
 
Both electrodes are just conductors, surrounded by ions. Reaction takes place only at the surface (phase boundary).

--
 
Awesome! Answered all my questions. Thanks again, Borek!
 
Thread 'Confusion regarding a chemical kinetics problem'
TL;DR Summary: cannot find out error in solution proposed. [![question with rate laws][1]][1] Now the rate law for the reaction (i.e reaction rate) can be written as: $$ R= k[N_2O_5] $$ my main question is, WHAT is this reaction equal to? what I mean here is, whether $$k[N_2O_5]= -d[N_2O_5]/dt$$ or is it $$k[N_2O_5]= -1/2 \frac{d}{dt} [N_2O_5] $$ ? The latter seems to be more apt, as the reaction rate must be -1/2 (disappearance rate of N2O5), which adheres to the stoichiometry of the...
Back
Top