Why Did My Financial Calculator Stop Working?

  • Thread starter Thread starter slipkorn17
  • Start date Start date
  • Tags Tags
    Broken Calculator
AI Thread Summary
A user experienced issues with their financial calculator, which flashed on and off, indicating a possible loose connection. Upon inspection, they discovered a disconnected black wire from the B- terminal and a red wire that seemed to need reattachment to the battery. Suggestions included using a heated screwdriver for emergency soldering and lemon juice as a flux alternative. The discussion also touched on a puzzling metal piece, speculated to be a solderless clip for the battery. Ultimately, the user successfully completed their finance final with a high score despite the calculator troubles.
slipkorn17
Messages
3
Reaction score
0
Hello all,

So I write a finance final tomorrow morning and my financial calculator decided to quit working on me. The screen would flash as it turned off and on rapidly, almost as if there was a loose connection. So I popped 'er open and here is what I found:

http://i.imgur.com/UdASBX1.jpg

It looks like the red wire needs to be attached to the other side of the battery, but when I hold it there, it does not turn on. It also doesn't look like anything was soldered on to that side of the battery before. I'm also confused by the weird metal piece.

Thanks in advance.
 
Engineering news on Phys.org
Nevermind, the black wire just came off of the B- terminal. It's pretty much toast now without a soldering iron.
 
try heating the tip of a screwdriver on your stove for an emergency soldering iron.
Try a little lemon juice for flux, but rinse well.

.
 
jim hardy said:
try heating the tip of a screwdriver on your stove for an emergency soldering iron.
Try a little lemon juice for flux, but rinse well.

And for really fine work, a finishing nail held in Vise-Grips works too. Neat tip about the juice; I never heard of that one before. Thanks.

Slipkorn, is that puzzling piece of metal actually attached to the top of the case, or just lying there? I ask because it sort of looks as if it might be a solderless clip to attach to the battery.
 
17 months later - I just went out and bought a decent one for $60. Used it for that final and never again. Maybe I'll use it in my last year starting next week. Thanks for responses, though.

Killed the final, by the way. Ended the course with a 90+.
 
Thread 'Weird near-field phenomenon I get in my EM simulation'
I recently made a basic simulation of wire antennas and I am not sure if the near field in my simulation is modeled correctly. One of the things that worry me is the fact that sometimes I see in my simulation "movements" in the near field that seems to be faster than the speed of wave propagation I defined (the speed of light in the simulation). Specifically I see "nodes" of low amplitude in the E field that are quickly "emitted" from the antenna and then slow down as they approach the far...
Hello dear reader, a brief introduction: Some 4 years ago someone started developing health related issues, apparently due to exposure to RF & ELF related frequencies and/or fields (Magnetic). This is currently becoming known as EHS. (Electromagnetic hypersensitivity is a claimed sensitivity to electromagnetic fields, to which adverse symptoms are attributed.) She experiences a deep burning sensation throughout her entire body, leaving her in pain and exhausted after a pulse has occurred...

Similar threads

Back
Top