Why Does a Schottky Diode Have Better Frequency Response than a PN Diode?

  • Thread starter Thread starter Guessist
  • Start date Start date
  • Tags Tags
    Diode
AI Thread Summary
Schottky diodes exhibit better frequency response than PN diodes primarily due to their lower junction capacitance and faster switching speeds. The metal-semiconductor junction in Schottky diodes allows for rapid charge carrier movement, reducing the time it takes to turn on and off compared to PN diodes. Additionally, the absence of minority carrier storage in Schottky diodes minimizes delay, enhancing their performance in high-frequency applications. Understanding these properties is crucial for applications requiring efficient signal processing. Overall, Schottky diodes are preferred in high-frequency circuits due to their superior response characteristics.
Guessist
Messages
1
Reaction score
0
I studied semiconductor basic long time ago... So I've reviewed these days.
For a while, i got a question about Schottky diode's frequency response.
That is Schottky diode has more awesome frequency response than pn diode.
Why does Schottky diode has good frequency response?
Somebody help me... I need your help...
 
Engineering news on Phys.org
Guessist said:
I studied semiconductor basic long time ago... So I've reviewed these days.
For a while, i got a question about Schottky diode's frequency response.
That is Schottky diode has more awesome frequency response than pn diode.
Why does Schottky diode has good frequency response?
Somebody help me... I need your help...

Welcome to the PF.

What has your reading told you so far about the differences between standard and Schottky diodes? What kind of property would affect the frequency response of a diode?
 
Very basic question. Consider a 3-terminal device with terminals say A,B,C. Kirchhoff Current Law (KCL) and Kirchhoff Voltage Law (KVL) establish two relationships between the 3 currents entering the terminals and the 3 terminal's voltage pairs respectively. So we have 2 equations in 6 unknowns. To proceed further we need two more (independent) equations in order to solve the circuit the 3-terminal device is connected to (basically one treats such a device as an unbalanced two-port...
suppose you have two capacitors with a 0.1 Farad value and 12 VDC rating. label these as A and B. label the terminals of each as 1 and 2. you also have a voltmeter with a 40 volt linear range for DC. you also have a 9 volt DC power supply fed by mains. you charge each capacitor to 9 volts with terminal 1 being - (negative) and terminal 2 being + (positive). you connect the voltmeter to terminal A2 and to terminal B1. does it read any voltage? can - of one capacitor discharge + of the...
Thread 'Weird near-field phenomenon I get in my EM simulation'
I recently made a basic simulation of wire antennas and I am not sure if the near field in my simulation is modeled correctly. One of the things that worry me is the fact that sometimes I see in my simulation "movements" in the near field that seems to be faster than the speed of wave propagation I defined (the speed of light in the simulation). Specifically I see "nodes" of low amplitude in the E field that are quickly "emitted" from the antenna and then slow down as they approach the far...
Back
Top