Nyquist Criterion: Determine Order of Open Loop Transfer Function W(s)

  • Thread starter Thread starter stefaneli
  • Start date Start date
AI Thread Summary
The discussion focuses on using the Nyquist criterion to determine the order of the numerator and denominator of an open loop transfer function W(s). It suggests that plotting a Nyquist chart can help visualize the effects of varying poles and zeros on the system's stability. Each pole contributes a maximum of 90 degrees of lag, which is important for analysis. However, it concludes that Nyquist alone may not provide a definitive answer to the original question about identifying the number of poles and zeros. Exploring additional resources or tools may be necessary for a comprehensive understanding.
stefaneli
Messages
19
Reaction score
0
I was wondering if it's possible to know the difference between order of numerator and order of denumerator of open loop transfer function W(s) using Nyquist criterion ('stable' poles/zeros are bothering me; basically is there a way to find out a number of poles and zeros of W(s))? I hope I've explained my problem good enough...Any help is appreciated.:)
 
Engineering news on Phys.org
Perhaps if you plot the Nyquist chart for some examples you concoct you might be able to answer this. Start off with a few poles, then introduce a zero midway between the poles and see what changes on the Nyquist plot, and so on. (Bear in mind that each pole contributes at most 90 degrees of lag.) If you search online I bet you'll find a free Nyquist plotter.

I'm not pretending to know the answer; but that's how I would go about investigating it. Good luck!
 
Here's a basic free plotter. Having played around with it, I don't think Nyquist alone is going to help with what you asked. http://www.facstaff.bucknell.edu/mastascu/eControlHTML/Problems/Freq/Interactive/Freq6NyquistP01Int.htm
 
Thread 'I need a concave mirror with a focal length length of 150 feet?'
I need to cut down a 3 year old dead tree from top down so tree causes no damage with small pieces falling. I need a mirror with a focal length of 150 ft. 12" diameter to 36" diameter will work good but I can't think of any easy way to build it. Nothing like this for sale on Ebay. I have a 30" Fresnel lens that I use to burn stumps it works great. Tree service wants $2000.
Hi all, i have some questions about the tesla turbine: is a tesla turbine more efficient than a steam engine or a stirling engine ? about the discs of the tesla turbine warping because of the high speed rotations; does running the engine on a lower speed solve that or will the discs warp anyway after time ? what is the difference in efficiency between the tesla turbine running at high speed and running it at a lower speed ( as fast as possible but low enough to not warp de discs) and: i...
Thread 'Where is my curb stop?'
My water meter is submerged under water for about 95% of the year. Today I took a photograph of the inside of my water meter box because today is one of the rare days that my water meter is not submerged in water. Here is the photograph that I took of my water meter with the cover on: Here is a photograph I took of my water meter with the cover off: I edited the photograph to draw a red circle around a knob on my water meter. Is that knob that I drew a red circle around my meter...

Similar threads

Back
Top