What is the charge needed to suspend an oil drop in an electric field?

AI Thread Summary
To suspend a 1.7*10^-13 kg oil drop in an electric field of 2.5*10^5 N/C, the required charge can be calculated using the equation q = mg/E. The weight of the oil drop is determined by F = mg, where g is the acceleration due to gravity (9.8 m/s^2). Setting the gravitational force equal to the electric force (qE) allows for the rearrangement to solve for charge. Substituting the values yields a charge of 6.66*10^-22 C. This charge is necessary to achieve equilibrium for the suspended oil drop in the electric field.
marshall4
Messages
50
Reaction score
0
What charge is required to suspend a 1.7*10^-13kg oil drop in an electric field of 2.5*10^5 N/C?
 
Physics news on Phys.org
Draw the Free Body Diagram
Apply \Sigma F = \vec F_m_a_g + \vec F_w_t = 0
As in case of equilibrium

Also apply the charge quantization
 


To solve this problem, we can use the equation F = qE, where F is the force on the oil drop, q is the charge on the oil drop, and E is the electric field strength.

We know that the force of gravity on the oil drop is equal to its weight, which can be calculated using F = mg, where m is the mass of the oil drop and g is the acceleration due to gravity (9.8 m/s^2).

Since the oil drop is suspended, the force of gravity must be equal to the force of the electric field, so we can set these two equations equal to each other:

qE = mg

We can rearrange this equation to solve for q:

q = mg/E

Plugging in the given values, we get:

q = (1.7*10^-13kg)(9.8 m/s^2)/(2.5*10^5 N/C)

Simplifying, we get:

q = 6.66*10^-22 C

Therefore, a charge of 6.66*10^-22 C is required to suspend the 1.7*10^-13kg oil drop in an electric field of 2.5*10^5 N/C.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top