Calculating Final Speed & Angle of a Rocket Motion

AI Thread Summary
The discussion focuses on calculating the final speed and angle of a rocket that turns on its engine to eject gas perpendicularly while traveling at 20 km/s in a non-gravity environment. The rocket's mass decreases by 25% during the engine's operation, affecting its momentum and resulting in a change in velocity. The final velocity components are determined using momentum conservation equations, leading to a final speed in the x-direction of approximately 19.2 km/s and a y-direction speed of about 0.86 km/s. The angle of the rocket's change in direction is calculated to be between 0 and 2.6 degrees, with the gas ejection assumed to be perpendicular to the initial motion. This analysis highlights the importance of considering both velocity components and their relationship to the rocket's orientation.
tamref
Messages
5
Reaction score
0

Homework Statement



A rocket is traveling with a speed 20 km/s in a non-gravity space. To fix the direction of motion, it turns on an engine, which pushes the gasses with constant speed 3 km/s w.r.t. the rocket perpendicularly to the direction of its motion. The engine is on till the mass of the rocket declines for 1/4 of the initial.

For what angle has the rocket changed the direction of motion and what is its final speed?


Homework Equations



x-axis: d( p(rocket) ) = - d( m(gasses) ) v(gasses) cos( alpha+d(alpha) )

dm/dt * v(rocket_final) + dv/dt m( rocket_new )= - dm/dt * v(gasses) (cos(alpha)cos(d(alpha)) - sin(alpha)sin(d(alpha)) )

dm/dt * v(rocket_final) + dv/dt ( m- dm/dt *t) = - dm/dt * v(gasses) *cos(alpha)cos(d(alpha))



The Attempt at a Solution



I tried to express the change in momentum of the rocket w.r.t. the angle of motion like above for both x- and y- axis, but I get unknown velocity and angle.
 
Physics news on Phys.org
Taking the direction of motion of the rocket to be the x-axis, write the momentum conservation equation in the y direction. This will give you the final velocity of the rocket in the y direction.

Now, you know both the x and y components of the final velocity, and you can calculate the angle that the velocity makes with the x-axis using trigonometry. (Hint: Draw a picture. What is tan(θ) in terms of Vx and Vy?)
 
Thank you, dx.

But the problem I see is, that the direction of gasses also changes with moving rocket. Therefore also Vx changes. The whole momentum does not go into Vy.
 
The direction of motion changes, but the orientation of the rocket stays the same. So the direction in which the gas is ejected is the same.
 
What refers orientation of the rocket to, dx?

I thought of this problem again and maybe this is a solution.

Let us say, that the rocket would push the gasses with a given Vr=3 km/s in front of itself. Then its final Vx would be 19,2 km/s.

On the other hand, if the rocket would push the gasses with a given Vr perpendicularly to the initial direction of motion, its final Vy would be 0,86 km/s.

Therefore in any case 0<Vy<0,86 and 19,2<Vx<20. Therefore the angle for which it turns is
0< theta < 2,6 degrees.


Using the fact about the angle, we can see, that the change in Vx in x-axis can be neglected, since sin(2,6)~0,045. Also since cos(2,6)~0,998, we can take V=Vr for the relative velocity of gasses in y-axis during turning.

Therefore we can really assume that the gasses are ejected perpendicularly to the initial direction of rocket's motion.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Back
Top