Height of Block on U-Tube: Calculations & Results

  • Thread starter Thread starter dorian_stokes
  • Start date Start date
  • Tags Tags
    Height U-tube
AI Thread Summary
The discussion revolves around calculating the height difference in a U-tube containing two fluids of different densities, with a block of mass 20 g resting on one side. The fluids have densities of 1090 kg/m3 and 595 kg/m3, and the cross-sectional area of the tube is 4.7 x 10^-4 m2. The total height of the fluid column is given as 20 cm. The problem requires determining the height offset (h) between the two sides of the U-tube. The right side, having the greater density, plays a crucial role in the calculations.
dorian_stokes
Messages
24
Reaction score
0

Homework Statement



A block of mass 20 g sits at rest on a plate that is at the top of the fluid on one side of a U-tube as shown below. The U-tube contains two different fluids with densities ρ1 = 1090 kg/m3 and ρ2 = 595 kg/m3 and has a cross sectional area A = 4.7 10-4 m2. The surfaces are offset by an amount h as shown.


Homework Equations





The Attempt at a Solution

 
Physics news on Phys.org
What is required in the problem? There is no figure.
 
It's asking for height in m. The right side has the greater density. The total height was 20cm.
 
Thread 'Variable mass system : water sprayed into a moving container'

Thread 'Variable mass system : water sprayed into a moving container'

Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
View full post »

Thread 'Struggling to understand the concept of this question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »

Similar threads

Find the height of fluid in a U-tube container?
Replies
1
Views
3K
Fluid Statics- u-tube displacement
Replies
2
Views
6K
How to Calculate Fluid Height in a U-Tube Using Bernoulli's Equation
Replies
4
Views
9K
Pressure-related problem with Mercury and Water in a U-tube
Replies
18
Views
6K
Calculating Air Speeds in a Venturi Tube Using Conservation of Fluid Mass
Replies
1
Views
3K
Calculating Liquid Height Difference in U-Tube | Fluid Mechanics Homework
Replies
4
Views
3K
Pressure in a Fluid-Filled Glass with a Side-Hole Tube: Is Pa = Pb = Pc?
Replies
1
Views
2K
Calculating Work Done by Gas in a Mercury-Filled U-Tube with Right Angle Bends"
Replies
10
Views
2K
Calculating Centripetal Force in a Bent Tube
Replies
29
Views
3K
Two liquids are inside of a U-tube, which
Replies
6
Views
2K

Hot Threads

Recent Insights

Back
Top